Panasonic NV-VP30EBL manual VCR Distortions

VCR DISTORTIONS

￿

If you notice interference or a shift of the picture during normal, still or Slow Motion playback, press the

Manual correction of a bad picture:

TRACKING / V-LOCK button towards + or - to correct the picture.

Press + and - together to actuate automatic correction. Some video cassettes do not support tracking

￿

control. This is not indicative of a malfunction.

The automatic clock does not

￿

Set Clock set to AUTO (page 35).

set correctly:

￿

Set Time and Date manually if the unit does not find a station emitting the time signal.

￿

The use of E-300 cassettes may cause problems if the recordings were taken at slow tape speeds

(LP or EP).

Bad picture or sound:

￿

Verify that the aerial and/or scart cables are attached and work properly.

Check the SQPB setting for S-VHS cassettes (page 33).

￿

￿

Please contact your service technician if the video heads are dirty or worn out.

Having a technical service shop clean the video heads is not covered by the guarantee.

￿

If

flashes on the unit, check if the protection tab of the video cassette is still in.

￿

Check the Clock set menu (page 35).

The recording functions do not

￿

Check the start and stop time of the timer programme (page 24).

work properly:

￿

Check if the TIMER button has been pressed to put the unit into timer mode after programming a

recording (page 24).

￿

Check the start and stop time of a PDC recording (page 26).

The model no. and serial no. of this product are stuck down on the rear of the appliance.

Please enter them below to serve as reference.

Model No.

Serial

No.