Jogging & Homing
AX_JogMinus | JOG SELECTED AXIS MINUS DIRECTION |
AX_JogPlus | JOG SELECTED AXIS PLUS DIRECTION |
AX_JogMinusFast | JOG SELECTED AXIS MINUS DIRECTION at Fast Rate |
AX_JogPlusFast | JOG SELECTED AXIS PLUS DIRECTION at Fast Rate |
AX_JogStop | STOP ALL JOGGING |
AX_HomeAxis | HOME THE SELECTED AXIS |
MDI Mode Commands
AX_StartMDI | Start MDI Mode Signal to DLL |
AX_StopMDI | Stop MDI Mode Signal to DLL |
AX_ExecuteMDI | Execute MDI command String to DLL |
Virtual Overrides
AX_SetFov | Set Feedrate override manually with sliders |
AX_SetRov | Set Rapid rate override manually with sliders |
AX_SetSov | Set Spindle override manually with sliders |
Graphics
AX_InitializeGPH | Initialize Graphics Engine & pass handle of the control area |
AX_SetGphView | Tell Graphics which ViewPort to plot |
AX_ZoomWindow | Pass Zoom Coordinates (in Pixies) to the Graphics Engine |
AX_SetGraphics | Turn Graphics Generator on/off |
Error Message
AX_SystemErr | Get the System errors from the DLL if any |
AX_ClearSystemErr | Acknowledges & Clears the Error from the DLL |
Cycle Functions
AX_CycleStart | Starts Loaded G Code File Running |
Feedhold | Stop the Program running until Cleared |
Reset | Stop Current programs and effects a M30 |
Auto/Step | Set this bit (133) to tell DLL to Cycle in Auto |
| Clear this bit to run in Step |
API Users Guide | API Command Groups - 7 |