Pelco DX9200HDDI installation manual Deleting TWO Arrays

DELETING TWO ARRAYS

To delete two arrays:

1.Verify that the RAID is not being used by any devices (DX8100).

2.On the DX9200HDDI control panel, do the following:

a.Press the CTRL button. The TO CONTROLLER PRESS ANY KEY message is display on the LCD screen.

b.Press !. The Enter Password prompt is displayed.

c.Press ! to enter 00000000 (default password).

d.Press !. The Main menu is displayed.

3.To select array 1, do the following:

a.From the Main menu, press !"to display 2 RAID Params.

b.Press !. The 2 RAID Params menu is displayed.

c.Press !"to scroll to 21 Array 1.

d.Press !. The 21 Array 1 menu is displayed.

e.Press !"to scroll to 211 Re-Conf RAID.

f.Press !. The 211 Re-Conf RAID menu is displayed.

g.Press !"to scroll to YES.

h.Press !. The 21 Array 1 menu is redisplayed.

4.To delete the RAID level for array 1, do the following:

a.From the 21 Array 1 menu, press !"to scroll to 212 RAID Level.

b.Press !. The 212 RAID Level menu is displayed.

c.Press !"to scroll to NONE.

d.Press !. The 21 Array 1 menu is redisplayed.

5.To delete array 2, do the following:

a.Press Exit. The 2 RAID Params menu is displayed.

b.Press !"to scroll to 22 Array 2.

c.Press !. The 22 Array 2 menu is displayed.

d.Press !"to scroll to 221 Re-Conf RAID.

e.Press !. The 221 Re-Conf RAID menu is displayed.

f.Press !"to scroll to YES.

g.Press !. The 22 Array 2 menu is redisplayed.

h.Press ! to select YES. The entry is confirmed and the 22 Array 2 menu is redisplayed.

C2635M (1/07) 33