Pelco DX9200HDDI installation manual Introduction, Parts List

Page 7

Introduction

Welcome to the external video storage upgrade for the DX8100 Series digital video recorder (DVR). The video storage upgrade consists of two products: the DX8100-ISCI SCSI card and the DX9200HDDI Series IDE video storage unit. These two items are ordered and shipped separately.

The DX8100-ISCI SCSI card connects the DX9200HDDI to the DX8100 using a 50- to 68-pin SCSI cable. The SCSI cable is included with the DX9200HDDI.

The DX9200HDDI contains the hard drives that allow you to increase the DX8100’s storage capacity up to 3.5 TB. The DX9200HDDI option is available for 8- and 16-channel DX8100 systems.

The DX9200HDDI is used for offline backup or realtime video storage. When used as a real time storage device, the frame rate of each channel on the DX8100 must adhere to the following:

8-channel DVRs: Less than or equal to 30 images per second (ips).

16-channel DVRs: Less than or equal to 24 ips. Setting the frame rate above 24 ips for a 16-channel DVR will result in skipped frames and significant performance degradation.

This document describes how to install the DX8100-ISCI SCSI card, configure the DX9200HDDI RAID operation, connect the DX8100 to the DX9200HDDI, and configure the DX8100 to operate with the 9200HDDI video storage unit. For information about installing the DX9200HDDI, refer to the DX9200HDDI Series IDE Video Storage Unit Installation/Operation manual.

This section is organized into the following topics:

Parts List on this page

Tools Needed on page 8

Other DX8100 Optional Accessories on page 8

The DX8100-ISCI SCSI card and the DX9200HDDI Series storage unit are shipped individually. Figure 1 shows the DX8100-ISCI SCSI card and the DX9200HDDI Series video storage unit.

Figure 1. DX8100 SCSI Card and DX9200HDDI Storage Unit

PARTS LIST

In addition to this document, Table A lists the items that are included in the DX8100-ISCI kit. For information about installing the DX9200HDDI, refer to the DX9200HDDI Series IDE Video Storage Unit Installation/Operation manual.

 

 

Table A. DX8100-ISCI Kit Items

 

 

 

 

Qty

Description

 

Purpose

 

 

 

 

1

Adaptec® SCSI Card 39160

 

Provides interface transfer of data between DX8100 and the

 

DX9200HDDI video storage unit.

 

 

 

 

 

 

 

1

Installation manual

 

Describes how to install the DX8100-ISCI SCSI card.

 

 

 

 

C2635M (1/07)

7

Image 7
Contents DX8100-ISCI Scsi Page Contents List of Illustrations C2635M 1/07 List of Tables Introduction Parts ListTools Needed Other DX8100 Optional AccessoriesGetting Ready Installing the DX8100-ISCI Scsi CardOpening the DX8100 Chassis Preparing the DX8100 for Scsi Card InstallationCPU Understanding the DX8100 Component LayoutMoving the Main Capture Card to Slot Moving Main Capture Card Installing the DX8100 Scsi CardReassembling the Unit Installing the Hard Drives Setting Up the DX9200HDDICtrl Configuring the DX9200HDDIConfiguring a Single RAID Level 5 Array Specifying the Number of Hard Drives in the Array Single RAID Level 5 Array Initialization Status Description Configuring a Single RAID Level 5 Array with HOT Spare C2635M 1/07 Configuring TWO RAID Level 5 Arrays C2635M 1/07 C2635M 1/07 C2635M 1/07 Configuring TWO RAID Level 5 Arrays with HOT Spare C2635M 1/07 C2635M 1/07 C2635M 1/07 Deleting ONE Array Deleting ArraysC2635M 1/07 Deleting TWO Arrays C2635M 1/07 DX8100 Connecting the DX8100 to the DX9200HDDIConfiguration Instructions for Storage Arrays UP to 2.0 TB Configuring the DX8100 to Access the DX9200HDDIMy Computer Quick Menu Computer Management window opens Select Disk to Write Signature Dialog Box C2635M 1/07 Create Partition Wizard Specify Partition Size Dialog Box Click Next. The Assign Drive Letter or Path dialog box opens Click Finish. The new drive appears in the device list Opening Drive Options Menu Initializing Drive Allocation My Computer Quick Menu Configuration Instructions for Storage Arrays Above 2.0 TBWrite Signature and Upgrade Disk Wizard Select Disks to Upgrade Wizard Dialog Box Unallocated Space Shortcut Menu Specify Partition Size Dialog Box Click Next. The Assign Drive Letter or Path dialog box opens Click Finish. The new drive appears in the device list C2635M 1/07 Initializing Drive Allocation Product Warranty and Return Information ISO9001
Related manuals
Manual 20 pages 10.68 Kb