Pelco DX9200HDDI installation manual Tools Needed, Other DX8100 Optional Accessories

TOOLS NEEDED

Table B. Required Tools

Qty Description

1

Phillips screwdriver #1 (nonmagnetic)

1

Properly grounded electrostatic discharge (ESD) wrist strap and mat

4

Small containers for storing screws (optional)

OTHER DX8100 OPTIONAL ACCESSORIES

The DX8108 base unit comes with an 8-channel Capture Card and the DX8116 base unit includes a 16-channel Capture Card.

The DX8100-ISCI option is not supported for the DX8124 or DX8132 models. These models use two Capture Cards that are installed in PCI slots 2 and 3. In this case, no available slots remain to install the DX8100-ISCI option, which includes a DX8100-ISCI SCSI card that is installed in slot 2.

The table below describes other DX8100 optional accessories that can be installed with the DX8100-ISCI option. For a list of the current DX8100 options, refer to the DX8100 Product Specification Sheet. If an option is not listed in Table C, the option is not supported in combination with the options described in this manual.

	Table C. DX8100 Optional Accessories
Option Number	Description
DX8108-AUD	The DX8100 8-channel audio input card audio card is installed on a 16-channel Capture
	Card. In this case, only audio inputs 1 to 8 are available for recording. Audio channels 9 to
	16 can be configured, but audio data is not recorded.
DX8116-AUD	The DX8100 16-channel audio input card audio card cannot be installed on an 8-channel
	Capture Card.
DX8100-512RAM	DX8100 memory upgrade from 512 MB to 1 GB.
DX9200HDDI	External RAID storage expansion unit. This option is not available with DX8124 or
	DX8132 models.
KBD300A	KBD300A universal keyboard (requires KBDKIT).
KBDKIT (-X)	Remote keyboard wiring kit (X = 220 VAC).
VSI-PRO	AVE video serial interfaces for ATM/POS. The VSI-PRO and required cabling is available
	from AVE.

8 C2635M (1/07)