Pelco C2602M-a manual Main Window Overview

Page 14

Main Window Overview

Figure 8. DX4000 Main Window

The DX4000 main screen provides access to current system information.

Camera title: Displays the name of the camera. The camera title is displayed for each camera that is connected to the DX4000.

Recording status: Indicates that the camera is being recorded. A red square means the camera is being recorded; green means the camera is prerecording video into a buffer. The recording status appears for each camera that is connected to the DX4000.

Date and time: Indicates the current date and time when viewing live video. This information changes when viewing recorded video.

Hard disk status: Indicates the estimated amount of storage space used on the hard disk.

14	C2602M-A (6/06)

Image 14

Contents DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Illustrations List of Tables Description Features ModelsConnecting Devices to the DX4000 Overview of the SystemDX4000 Controls Controls on the Front Panel of the DX4000Video Control Buttons on the Front Panel of the DX4000 Control Buttons on the Front PanelOperating the DX4000 from the Remote Control To start the DX4000 Before You BeginStarting and Stopping the DX4000 Choosing a User Account Table A. User Accounts and Access LevelsAll manager and operator access To stop the DX4000Main Window Overview Changing the Information Displayed on the Monitor Changing the Display ModeTo change the screen sequencing mode Adjusting Menu Settings Display MenuRecord Menu Camera Menu Audio MenuAlarm Menu Use the Alarm menu to set up alarms and relays for camerasSystem Menu System MenuBackup Menu Back UP MenuChanging Passwords Password MenuResetting Passwords To reset the passwordsFactory Default Settings Factory Default Reset Warning MessageScreen View Selection Screen Rotation ModeChanging the Screen Layout PAN, Tilt and Zoom Controls Adjusting the Focus or Iris on a CameraControlling Cameras from the DX4000 To run a preset Working with PresetsTo create a preset To run a predeﬁned presetWorking with Patterns Using PresetTo set up a pattern To run a pattern Modifying Camera SettingsTo modify camera settings C2602M-A 6/06 Modifying Audio Settings To modify audio recording settingsTo modify live audio settings Modifying Image Recording Settings To modify image recording settingsModifying Alarms and Relays To modify alarm inputsTo modify relay outputs Setting UP a Recording Schedule Creating Recording SchedulesC2602M-A 6/06 Setting UP Motion Detection Recording Motion Detection Setup MenuC2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 Monitoring Live Video To change the screen modeTo view a speciﬁc video channel in single mode Working With Recorded Video Searching for VideoTimeline Showing Available Recorded Video C2602M-A 6/06 To back up video Playing Recorded VideoBacking UP Video Missing Media Warning Message Overview of the Main Screen Working With the Remote Agent ApplicationAbout the Remote Agent To start the remote agent Remote Agent Control ButtonsStarting and Stopping the Remote Agent To stop the remote agentConfiguring the Remote Agent To create a network connection for the DX4000Configuring the DX4000 from the Remote Agent To conﬁgure optional settings on the remote agentRecording Settings To set up recording qualityTo set up recording schedules Timer Recording Setup ScreenTo set up alarm recording To set up motion detectionC2602M-A 6/06 Camera Settings To conﬁgure camerasAudio Settings To set up audio recordingAlarm Settings To set up live audioSystem Settings To set up alarm inputs and relay outputsTo conﬁgure buzzer sounds To modify passwordsTo review system information To set the network speed To conﬁgure the disk write modeTo disconnect remote agent connections To control PTZ cameras To adjust the focusControlling Cameras from the Remote Agent Capturing Live Video from the Remote Client To listen to or disable audioMonitoring Live Video from the Remote Agent Controlling AudioUse the following buttons to review the recorded video Working with Recorded Video on the Remote AgentSearching for Recorded Video To search by date or time Click the Log button . The Search Log screen appearsTo search by event Event Viewer ScreenRemote Agent Backup Screen Backing UP VideoSave as... dialog box appears To save a snapshotTo print a snapshot Print screen appearsViewing Video with the Backup Player Click the Open ﬁle button. The following screen appears To view recorded video with the backup playerTo authenticate recorded video with the backup player About the Web Client Starting the WEB ClientClick the Connect button . The Login dialog box appears Monitoring Video with the Web ClientProduct Warranty and Return Information ISO9001

Related manuals

Manual 74 pages 2.6 Kb