Pelco C2602M-a manual Back UP Menu, Backup Menu

Page 21

BACK UP MENU

Figure 18. Backup Menu

Use the Backup menu to copy recorded video from the DX4000 to a backup device, usually to a writable CD (CD-RW). If your unit does not have a CD-RW drive, you can back up video to a USB ﬂash memory device so long as it has sufﬁcient storage space for the recorded video clip. After you have entered all of the settings, select Start, which is located to the right of the End Time ﬁeld.

•Device: Select the device to which the video will be copied. If “No Backup Device” appears, your unit does not contain any writable media in either the CD-RW drive or USB port. You cannot back up recorded video if no device is available or if the CD already has data written on it. Always provide a blank CD, or reformat an existing CD before using it. You must reformat CDs on a computer.

•Start Time: Select the start time for the video that you want to copy.

•End Time: Select the end time for the video that you want to copy.

•All: Select this option if you want to copy all recorded video to external storage devices. The storage device must have sufﬁcient space to copy all of the video.

•Video: Select each channel if you want to copy only the video recorded from speciﬁc cameras.

•Audio: Select each channel if you want to copy only the audio recorded from speciﬁc cameras.

•Title: Enter a name for the backup copy of recorded video. The name can contain 11 characters and can contain these letters or symbols: A through Z, 0 through 9, or a space.

•Event: Select this option if you want to copy only event-based recordings.

C2602M-A (6/06)

21

Image 21

Contents DX4000 Digital Video Recorder Contents C2602M-A 6/06 List of Illustrations List of Tables Description Models FeaturesOverview of the System Connecting Devices to the DX4000Controls on the Front Panel of the DX4000 DX4000 ControlsControl Buttons on the Front Panel Video Control Buttons on the Front Panel of the DX4000Operating the DX4000 from the Remote Control Before You Begin Starting and Stopping the DX4000To start the DX4000 All manager and operator access Table A. User Accounts and Access LevelsChoosing a User Account To stop the DX4000Main Window Overview Changing the Display Mode To change the screen sequencing modeChanging the Information Displayed on the Monitor Display Menu Adjusting Menu SettingsRecord Menu Audio Menu Camera MenuUse the Alarm menu to set up alarms and relays for cameras Alarm MenuSystem Menu System MenuBack UP Menu Backup MenuPassword Menu Changing PasswordsTo reset the passwords Resetting PasswordsFactory Default Reset Warning Message Factory Default SettingsScreen Rotation Mode Changing the Screen LayoutScreen View Selection Adjusting the Focus or Iris on a Camera Controlling Cameras from the DX4000PAN, Tilt and Zoom Controls To create a preset Working with PresetsTo run a preset To run a predeﬁned presetUsing Preset To set up a patternWorking with Patterns Modifying Camera Settings To modify camera settingsTo run a pattern C2602M-A 6/06 To modify audio recording settings Modifying Audio SettingsTo modify live audio settings To modify image recording settings Modifying Image Recording SettingsTo modify alarm inputs Modifying Alarms and RelaysTo modify relay outputs Creating Recording Schedules Setting UP a Recording ScheduleC2602M-A 6/06 Motion Detection Setup Menu Setting UP Motion Detection RecordingC2602M-A 6/06 Setting UP ALARM-BASED Recording C2602M-A 6/06 To change the screen mode To view a speciﬁc video channel in single modeMonitoring Live Video Searching for Video Working With Recorded VideoTimeline Showing Available Recorded Video C2602M-A 6/06 Playing Recorded Video Backing UP VideoTo back up video Missing Media Warning Message Working With the Remote Agent Application About the Remote AgentOverview of the Main Screen Starting and Stopping the Remote Agent Remote Agent Control ButtonsTo start the remote agent To stop the remote agentTo create a network connection for the DX4000 Configuring the Remote AgentTo conﬁgure optional settings on the remote agent Configuring the DX4000 from the Remote AgentTo set up recording quality Recording SettingsTimer Recording Setup Screen To set up recording schedulesTo set up motion detection To set up alarm recordingC2602M-A 6/06 To conﬁgure cameras Camera SettingsTo set up audio recording Audio SettingsTo set up live audio Alarm SettingsTo set up alarm inputs and relay outputs System SettingsTo modify passwords To review system informationTo conﬁgure buzzer sounds To conﬁgure the disk write mode To disconnect remote agent connectionsTo set the network speed To adjust the focus Controlling Cameras from the Remote AgentTo control PTZ cameras Monitoring Live Video from the Remote Agent To listen to or disable audioCapturing Live Video from the Remote Client Controlling AudioWorking with Recorded Video on the Remote Agent Searching for Recorded VideoUse the following buttons to review the recorded video Click the Log button . The Search Log screen appears To search by date or timeEvent Viewer Screen To search by eventBacking UP Video Remote Agent Backup ScreenTo print a snapshot To save a snapshotSave as... dialog box appears Print screen appearsViewing Video with the Backup Player To view recorded video with the backup player To authenticate recorded video with the backup playerClick the Open ﬁle button. The following screen appears Starting the WEB Client About the Web ClientMonitoring Video with the Web Client Click the Connect button . The Login dialog box appearsProduct Warranty and Return Information ISO9001

Related manuals

Manual 74 pages 2.6 Kb