Pelco C454M-C Unpacking Instructions, Recommended Tools, Suspended Ceiling Models, Pendant Models

Page 6

1.2 UNPACKING INSTRUCTIONS

Unpack and inspect all parts carefully.

Be sure to save the shipping carton and any inserts. They are the safest material in which to make future shipments.

If an item appears to have been damaged in shipment, replace it properly in its carton and contact the factory at 1-800-289-9100 or 1-559-292-1981 for a replace- ment. (International customers fax 1-559-348-1120 for authorization and instruc- tions.)

If an item needs to be returned to the factory for repair, consult the WARRANTY AND RETURN section of this manual for instructions.

The following items are supplied:

Suspended Ceiling Models

1Back box with face plate, trim ring, and dome

1Parts bag

2 Eye bolts with nuts, flat washers and split lock washers

4 T-rail clips

1Installation/Operation Manual (C454M-C)

Hard Ceiling Models

1 Back box with trim ring and dome

1 Installation/Operation Manual (C454M-C)

Pendant Models

1Bezel with dome

1Pendant cap

1Back box

1Back box gasket

1Parts bag with two O-rings (outdoor models only)

1Installation/Operation Manual (C454M-C)

1.3RECOMMENDED TOOLS

Pelco does not supply basic tools needed for the installation process. The following tools are recommended:

Medium Phillips screwdriver

Wire cutter

Wire stripper BNC crimp tool Coaxial cable stripper

Hammer and punch (suspended ceiling model only) Large Phillips screwdriver (suspended ceiling model only) 11 mm wrench (suspended ceiling model only)

Drill (hard ceiling models only)

6

Pelco Manual C454M-C (1/98)

Image 6
Contents Listed Contents Revision History List of IllustrationsList of Tables Manual # Date CommentsThis page intentionally left blank Important Safeguards and Warnings GeneralProduct and/or manual may bear the following marks Suspended Ceiling Models Unpacking InstructionsRecommended Tools Hard Ceiling ModelsIndoor, Suspended-Grid Ceiling DescriptionModels Indoor, Hard CeilingIndoor, Pendant Outdoor, PendantMounting InstallationProceed to .2, Wiring Instructions Suspended Ceiling MountingOptional Backup Plate Installation Hard Ceiling MountingBackup Plate Installation Pendant MountingOn-Board Receiver/Driver Wiring InstructionsProceed to .3, Dome Drive Installation TXD+ RXD+RG6/U LoadPelco Manual C454M-C 1/98 Pelco Manual C454M-C 1/98 Pelco Manual C454M-C 1/98 Preset Non-SL Models Hard-Wire or Remote Receiver/DriverNon-Preset Models Preset SL ModelsWiring Diagram, Hard-Wire Control with Heater Wiring Diagram, Hard-Wire Control without Heater Heater/Blower Kit Field Installation Dome Drive InstallationExploded Assembly Diagrams Pelco Manual C454M-C 1/98 MRCA4000COMP Back Plate Exploded Assembly Diagram TRBJ6-2 TRB6TBV-10-OEZH1/4CLIPSS TRBTC6-10-PFHEnclosure Back Box SpecificationsPower Requirements EnclosureSuspended/Hard Ceiling Dimension Drawings Warranty and Return Information Warranty