Pelco C2652M manual Rear Panel, Illustrates the rear panel of the FT8332/FR8332 unit

Page 7

REAR PANEL

Figure 4 illustrates the rear panel of the FT8332/FR8332 unit.

Figure 4. Rear Panel of FT8332 Transmitter/FR8332 Receiver

ìVideo Connectors 1-32:BNC connectors that provide 75-ohm analog video input (FT8332)/output (FR8332).

îFiber Optic Connector: An ST multimode or single-mode connector.

ïAuxiliary Relay Output Connector: A 3-pin header that provides a relay output to external equipment if an optical signal or laser fault occurs.

ñStand-Alone Power Connector: A 5-mm barrel connector for power connection of stand-alone unit. Accepts electrical power from an external 12 VDC power supply (provided) or from a 24 VAC power supply.

óRack Power Connector: A 6-pin connector that accepts electrical power from an EIA rack-mounted power supply such as the Pelco 12 VDC EPS5000-120 power supply.

For additional information about rear-panel connections, refer to Installation on page 8.

C2652M (1/08)

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents FT8332/FR8332 Fiber Transmitter Receiver List of Illustrations ContentsList of Tables Important Safety Instructions Radio and Television Interference Regulatory NoticesMultimode Models Product OverviewDescription ModelsFront Panel of FT8332/FR8332 Unit with Bezel Front PanelIllustrates the rear panel of the FT8332/FR8332 unit Rear PanelPackage Contents InstallationShown Actual Size Mounting the TRANSMITTER/RECEIVER Into a Rack Mounting the TRANSMITTER/RECEIVERInserting Cage Nuts Rack Front Mounting the TRANSMITTER/RECEIVER to a Wall Pin Number ConnectionsVideo Present LED TroubleshootingTroubleshooting FRONT-PANEL Indicators Removing the BezelRX Optical Link Loss Specifications onVideo SpecificationsSingle-Mode 9/125 µm Model Number Optical MaximumTransmitter Multimode 62.5/125 µmProduct Warranty and Return Information ISO9001
Top Page Image Contents