vtfx16a
When the Remote Doesn't Work Right
Check out these possibilities:
Low Battery
If the remote is not working even at close range, try putting in two fresh AA batteries.
When replacing the batteries, remove the old batteries and press the POWER button on the remote and hold it for about 10 seconds, then insert two fresh batteries.
Objects in the Way
There may be objects between the remote and the VCR - for instance, a stack of books on the coffee table, your
If You Just Want to Watch TV
For normal TV viewing, you do not need to disconnect the VCR. When the TV and VCR are already on, press POWER on the remote control. The VCR will shut off, but the TV will stay on.
If you are recording on the VCR but want to watch a different channel on the TV, press the VCRFFV button to switch back and forth between the TV channel and the recording channel.
VCR Controls
Front Panel Controls Illustration
POWER Turns VCR power on and off.
STOPIEJECT | Cancels any videotape | action, and when pressed a second | |
time, ejects | tape. |
|
|
PLAYISTILL | Play | and pauses the loaded | videotape. |
DISPLAY Shows time, channel, and status indicators.
CHANNELFFRACKING Up and down arrows for selecting channels.
Used to adjust the tracking during playback.
REClIRT To begin recording.
SHUTTLE DIAL Controls the videocassette's forward and reverse
17