Go-Video DDV9000 manual On-Screen Menu System, Factory Settings

1

2

3

Press MENU repeatedly to cycle through the Dual-Deck VCR’s three main menus.

On-Screen Menu System

The On-Screen Menu System allows you to program all the features of your Dual-Deck VCR. To navigate the On-Screen Menu System, use the following keys:

Press In order to:

Enter the On-Screen Menu system and

MENUcycle through the three main menus: Dual-Deck Features, Deck One Settings and Deck Two Settings.

Move up or down to highlight the menu item you wish to select.

Cycle through the choices for each menu item.

Highlight the desired menu item and cycle through each option. (This method is used in the instructions throughout this manual.)

QUIT	Save your choices and exit the menu
	system.

Select Factory Settings to restore all menu items to their defaults.

Factory Settings

To clear any changes you have made to the menu settings and restore the original Go-Video factory settings (refer to the inside back cover to view these default settings):

1 Press the MENU button until the DUAL-DECK FEA- TURES menu appears.

2 Press “1” to select VCR SETTINGS/SET CLOCK.

3 Press “1” to select DISPLAY SETTINGS/CLOCK.

4 Press “5” to select FACTORY SETTINGS (a red menu will appear.)

5 Press “1” to keep your clock and timer events, or “2” to clear all settings.

6 Press CLEAR	to confirm your choice and restore the
factory settings.

Note: If you decide you do not want to clear your settings, press QUIT to exit the menu system or MENU to return to the DISPLAY SETTINGS menu.

CHAPTER 2 - THE DUAL-DECK SYSTEM™ 13