Go-Video DDV9000 manual Copy Mode, Speed Matching

Press “2” repeatedly to set SPEED MATCHING to:

- Use when optimal copy quality is desired. The record- ing speed will automatically match the play speed in Deck 1.

- Use only if you want to record two or more SP tapes onto one SLP tape. If so, you must set the Record Speed manually in the DECK TWO SETTINGS menu (see page 28).

If you wish to view a TV program while copying a tape, push TVVIEW until you see the Tuner, then change channels with the remote.

Press “1” repeatedly to set COPY MODE to:

Set the Copy Mode to

Auto, HQ1 or HQ2

Copy Mode

Your Dual-Deck VCR offers three copy modes: Auto, HQ1 and HQ2. HQ (High Quality) refers to Go-Video’s patented AmeriChrome Circuitry for optimal duplicating results. To set the Copy Mode:

1 Press MENU until the DUAL-DECK FEATURES menu

appears.

2 Press “2” to select COPY TAPE SETTINGS.

3

Auto - Automatically selects the best copy mode based on the speed of the source tape.

HQ1 - Best if the source tape is in SP or for any tape with Copy Guard.

HQ2 - Best if source tape is in LP or SLP without Copy Guard.

Speed Matching ensures that both decks are synchronized for optimal copy quality

Speed Matching

During a Copy Tape session, Speed Matching automatically sets the Deck 2 record speed to be the same as the Deck 1 playback speed. You will get the best copy quality when this feature is turned on.

1 Press MENU until the DUAL-DECK FEATURES menu

appears.

2 Press “2” to select COPY TAPE SETTINGS.

3

On

Off

20DUAL-DECK VCR USER'S GUIDE