Go-Video DDV9000 manual Record Features, Recording a TV Program, One Touch Recording

C H A P T E R 6

Record Features

Recording a TV Program

Your Dual-Deck VCR offers a variety of recording options, including One-Touch, Sequential, Loop and Timer Recording. To record a TV program:

1 Insert a blank tape into either deck.

2 Select the channel you want to record by pressing the CHANNEL Up/Down buttons on the remote control (or cable converter box if you have one).

3 Press

RECORD

to begin recording.

While you are recording the TV show, you can:

•Pause the recording by pressing PAUSE or stop the record- ing by pressing STOP (to resume recording, press RECORD ).

•Watch a different channel by pressing TV/VCR , then use your TV’s tuner to select the new channel.

•Watch a video by inserting a tape in the opposite deck and switching the TVVIEW button to that deck.

•Add recording time in half-hour increments with One Touch Recording (see below).

One Touch Recording

On-Screen Display for One-Touch Recordings

Use One-Touch Recording (OTR) to record in 30 minute increments up to 9 hours and 30 minutes.

1	Press		to start recording.
		RECORD
2	Press		again to enter OTR mode (OTR 0:30 will
		RECORD
	appear
		on the On-Screen Display).

3 Keep pressing RECORD to add 30-minute increments to the total recording time up to 9:30.

4 When the record time has elapsed, the deck will stop automatically. If the POWER key is pushed during

OTR, the VCR	If you push		one time beyond
will turn off		RECORD
upon completion	OTR 9:30, the VCR goes into LOOP
	mode, which allows the VCR to
of recording.
	record in a continuous loop (see p.29).

CHAPTER 6 - RECORD FEATURES 27