JVC HR-VP638U manual Select D.S.T. Mode, Select Mode, Make Corrections, Auto, Manual

D.S.T. SELECT

=AUTO

ON

OFF

PRESS (5,°) TO SELECT

PRESS (MENU) TO END

MENU

6

q

CH

9

11

SELECT D.S.T. MODE

You have three choices: a–Select “AUTO” and the adjustment to your VCR’s clock will be made according to the incoming signal from the host channel.

b–Select “ON” and the adjustment will be made based on the clock itself.

c–Select “OFF” if Daylight Saving Time doesn’t apply to you.

Place the arrow next to your choice by pressing CH5° or SHUTTLE PLUS 5°, then press MENU and the Semi-Auto Clock Set screen reappears.

	1	2	3
NUMBER	4	5	6
	7	8	9
		0

CH

OK

MENU

SHUTTLE PLUS

**AUTO DAYLIGHT SAVING TIME

This function enables automatic adjustment of the VCR’s clock at the start and end of Daylight Saving Time. With Auto DST activated, . . .

. . . on the first Sunday of April at 2:00 AM, the clock is adjusted to 3:00 AM.

. . . on the last Sunday of October at 2:00 AM, the clock is adjusted to 1:00 AM.

Auto

5		SELECT MODE
		At the Override Auto Clock Set screen, place the arrow
		next to "AUTO CLOCK SET" by pressing CH▲▼ or
	SHUTTLE PLUS 5°, then power off the VCR. Do not
	power it on again until the clock has been adjusted.
	The clock is automatically adjusted on the hour except
	at 11:00 PM, midnight, 1:00 AM and 2:00 AM.

IMPORTANT

After setting the Semi-Auto clock set, make sure that the VCR is off before the next hour so that the clock can be adjusted. (The clock is automatically adjusted on the hour except at 11:00 PM, midnight, 1:00 AM and 2:00 AM.)

Manual

5		SELECT MODE
		At the Override Auto Clock Set screen (☞ pg. 10), place
		the arrow next to “MANUAL CLOCK SET” by pressing
		CH▲▼ or SHUTTLE PLUS	5	, then press OK.
			°
6		SET DATE, TIME AND D.S.T.
		The Manual Clock Set		MANUAL CLOCK SET
		screen is displayed and the
		first setting that can be set		DATE	1/ 1/96 MON
				TIME	– – : – – AM
		begins flashing.		D.S.T.	ON
		Press the appropriate
		NUMBER keys to set the		PRESS NUMBER KEY(0-9)
		date and time (if only 1
				OR (5,°), THEN (OK)
		digit, press "0" first). Press
				PRESS (MENU) TO END
		CH▲▼ or SHUTTLE PLUS
	5° to set AM/PM and D.S.T. (Daylight Saving Time) to
		“ON” (automatic adjustment based on VCR’s clock) or
		“OFF” (if D.S.T. doesn’t apply to you).
		Press OK after AM/PM and D.S.T. settings. The next
		setting that can be set begins flashing. When you’re
		finished with this set-up procedure, press MENU to start
		the clock.
		NOTE:
		CH5° and SHUTTLE PLUS 5° can be used to perform
		all operations. (In this case, press OK after each setting.)
7		MAKE CORRECTIONS
		To change any of the settings, press OK or SHUTTLE
	PLUS ª£ until the item you want to change
	blinks, then set as in step 6.