36
VCR Plus+
Timer
Programming
Before VCR Plus+ Timer programming, see "VCR Plus+ Setup" on page 19.
OK6
q
| TIMER RECORDING |
1 | LOAD A CASSETTE |
Make sure the record safety tab is present. | |
● The VCR’s power comes on automatically. | |
● If you’re watching on channel 3 or 4, press TV/VIDEO | |
| to select the VIDEO mode. VIDEO is displayed on the |
| front display panel. |
ACCESS VCR PLUS+ SCREEN
2 Press MENU on the remote control.
●The clock must be set in order to access the VCR Plus+ screen. If you
haven’t set the clock, the Main Menu screen appears when you press
MENU. Refer to page 7 for the Dual Quick Set procedure or page 9 for the clock setting procedure.
ENTER PLUSCODE NUMBER
3 Press the appropriate NUMBER keys to enter the PlusCode number printed in the TV listings for the TV program you wish to record.
●To make corrections, press CANCEL and input the correct PlusCode number.
●If the PlusCode number you input is incorrect, "ERROR" may appear on the screen to advise you of the error. This happens when the PlusCode number is for a program which has already passed. "ERROR" is displayed for about 4 seconds and the VCR Plus+ screen reappears (step 2).
| 1 | 2 | 3 |
NUMBER | 4 | 5 | 6 |
|
| NUMBER "9" | |
| 7 | 8 | |
| 9 | ||
CANCEL |
| 0 |
|
| "8" |
| |
| NUMBER |
| |
|
| TV/CABLE/VCR | |
SP/EP |
|
| TV/VIDEO |
|
|
|
OK
MENU
4
5
CHECK INPUT DATA
Press OK and the Program screen appears.
The PlusCode number you entered appears in the Program screen. Check to make sure it’s accurate.
● To
DAILY (NUMBER “8”) or WEEKLY (NUMBER “9”). “DAILY” or “WEEKLY” appears on the Program screen.
●If you made a mistake, press CANCEL and, after pressing MENU as many times as necessary to access the VCR Plus+ screen, input the correct PlusCode number.
SET TAPE SPEED
Press SP/EP.