![](/images/new-backgrounds/1312881/31288167x1.webp)
34
P![](/images/new-backgrounds/1312881/31288167xi29.webp)
LAYBACK![](/images/new-backgrounds/1312881/31288167xi31.webp)
![](/images/new-backgrounds/1312881/31288167xi32.webp)
AND![](/images/new-backgrounds/1312881/31288167xi34.webp)
RECORDING![](/images/new-backgrounds/1312881/31288167xi36.webp)
![](/images/new-backgrounds/1312881/31288167xi37.webp)
FEATURES
(cont.)![](/images/new-backgrounds/1312881/31288167xi40.webp)
![](/images/new-backgrounds/1312881/31288167xi41.webp)
![](/images/new-backgrounds/1312881/31288167xi42.webp)
Recording
6
q
OSD
1 | 2 | 3 |
4 | 5 | 6 |
7 | 8 | 9 |
C.RESET | 0 |
|
|
|
Record One Program While Watching Another
1 | ENGAGE TV MODE |
During recording... | |
● Press TV/VIDEO. The VCR's VIDEO indicator goes | |
out. (If you are using the RF connection (☞ pg. 6). to | |
| view the output from your VCR, the TV broadcast |
| being recorded disappears.) |
| ● If you are using the AV connection (☞ pg. 6), to view |
| the output from your VCR, change the TV's input |
| mode from AV to TV. |
SELECT CHANNEL FOR
VIEWING
2 Use the TV’s channel selector to set the channel you want to watch.
Display Elapsed Recording Time
RESET COUNTER TO ZERO
1 Before recording starts, press C.RESET. The counter resets to zero and displays the exact elapsed time as the tape runs.
DISPLAY ELAPSED TIME ON SCREEN
2 During recording, press OSD at any time to see the elapsed time. All indications corresponding to the current status of the VCR are displayed for 5 seconds. The counter display remains on the screen indicating the elapsed time. Press OSD again to remove the display.
●Make sure "SUPERIMPOSE" is set to "ON" (☞ pg. 28).