JVC HR-J548E, HR-J748EH specifications Safety Precautions, For Italy, Do not place the recorder

Page 2

2EN

SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

■When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

■Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM-West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

For Italy:

"It is declared that this product, brand JVC, conforms to the Ministry Decree n. 548 of 28 Aug.'95 published in the Official Gazette of the Italian Republic n. 301 of 28 Dec.'95"

IMPORTANT

■Please read the various precautions on this page before installing or operating the recorder.

■It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video record- ing, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

The STANDBY/ON button does not completely shut off mains power from the unit, but switches operating

current on and off. " " shows electrical power standby and " " shows ON.

Video tapes recorded with this video recorder in the LP (Long Play) mode cannot be played back on a single-speed video recorder.

Failure to heed the following precautions may result in damage to the recorder, remote control or video cassette.

1. DO NOT place the recorder . . .

... in an environment prone to extreme temperatures or humidity.

... in direct sunlight.

... in a dusty environment.

... in an environment where strong magnetic fields are generated.

... on a surface that is unstable or subject to vibration.

2.DO NOT block the recorder’s ventilation openings.

3.DO NOT place heavy objects on the recorder or remote control.

4.DO NOT place anything which might spill on top of the recorder or remote control.

5.AVOID violent shocks to the recorder during transport.

PAL

■Only cassettes marked "VHS" can be used with this videorecorder.

■HQ VHS is compatible with existing VHS equipment.

■SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

■Certain audio features of this product manufactured under a license from Desper Products, Inc. Spatializer® is a trademark owned by Desper Products, Inc.

MOISTURE CONDENSATION

Moisture in the air will condense on the recorder when you move it from a cold place to a warm place, or under extremely humid conditions—just as water droplets form in the surface of a glass filled with cold liquid. Moisture condensation on the head drum will cause damage to the tape. In conditions where condensation may occur, keep the recorder turned on for a few hours to let the moisture dry.

ABOUT HEAD CLEANING

Accumulation of dirt and other particles on the video heads may cause the playback picture to become blurred or inter- rupted. Be sure to contact your nearest JVC dealer if such troubles occur.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents HR-J748EH Hi-Fi Do not place the recorder Safety PrecautionsFor Italy Basic Connections Check ContentsInstalling Your NEW Record ER EN Situate RecorderSelect Country Auto Set UpTurn on the Recorder EN I Nitial Sett IngsIf you are referring to Perform Auto SET UPSelect Language On-screen displayLanguage for the on-screen display Initial SettingsIf both auto channel set and auto clock set have failed Just ClockLanguage EN Initial Settings Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetWith AV Connection Guide Program Number Set SetupMake List of Stored Station Names Channel Positions Number When Using a Satellite TunerEnter Showview Confirm Channel Position NumberBasic PlaybackStill Picture/Frame-By-Frame Playback Playback FeaturesPause During Playback Variable-Speed SearchOverride Automatic Tracking Adjust TrackingActivate HIGH-SPEED Search ManuallyPlayback Activate 3R PictureActivate Repeat Activate Instant Review Tape Position IndicatorActivate Index Search Index SearchActivate Scene Finder SET A/B Code SwitchRE-SUPPLY Power Stop Scene FinderSoundtrack Selection HR-J748E/EH only Activate SpatializerSpatializer HR-J748E/EH only During PlaybackBasic Recording Screen Access Main MenuS.T. Picture System Return to NormalPlayback 13 3 ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Displays Watch Reset CounterSelect Channel to SET Counter DisplayType of Broadcast On-screen Display Being Received SET Recording Duration Engage ITR ModeInstant Timer Recording ITR Press Record on the recorderTimer Recording EN Timer RecordingSatellite Tuner Users Press OKDATE+ Regular Timer ProgrammingEN Timer RECORDINGcont Press TV PROG. + Repeat steps 1-8for each additional programmeRevise Programme Access ProgrammeAccess Main Menu Screen InformationTimer Warning TimerAuto SP/LP Timer Engage Auto SP/LPMake Connections SET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerRecorder HR-J548EPlayer Recorder PlayerStart Camcorder Edit From a CamcorderSET RECORDER’S Input Start RecorderConnect Decoder Connecting Using a DecoderSelect Input Mode SET TunerSET TV Brand Code TV Multi Brand Remote ControlControl Your TV Using Additional Buttons TRY Operating TVTRY Operating Satellite Tuner Satellite Tuner MultiSET Satellite Tuner Brand Code Pointer to your countrys Tuner SETAuto Channel Set Name, then press OK.SET Close Confirmation Select ItemDelete Channel Select NEW PositionPerform Tuning Switch StationsAccess Manual CH. SET Select NEW StationTV Station And ID List Move the highlight bar pointer to Clock SET by Clock SETPreparation Screen appearsSET Date and Time SET Clock AutomaticallyReturn to Normal Screen SET Just ClockSet the TV to its AV mode Troubleshooting E NIf you are using the AV connection Set the TV receiver to the VideoTimer again OubleshootingÄ remain lit on the display panel. Is there a problem? Questions and Answer S E NSpatializer Button pg HR-J748E/EH Review Button pg HR-J548E Remove the cap to use the front panel connectorsIndex Display Panel J748E/EH EN Index Installing BatteriesHow To Use HR-J748E/EH Video in x SpecificationsMaximum recording time International Telephone Country Code Auto Set Up completedHR-J748E/EH/548E Language Code
Top Page Image Contents