JVC HR-VP683U manual Basic, Recording, Select recording channel, Set tape speed, Start recording

Basic		EN 19
	This VCR can check the tape condition during recording
Recording	(and playback), and realizes the best possible pictures.
	cover the hole with adhesive tape before
	Load a cassette
	1 Make sure the record safety tab is intact. If not,
Turn on the VCR and the TV, and select the VCR	inserting the cassette.
	Select recording channel
channel 3 or 4 (or AV mode) on the TV.
FF ( Á )	2 On the front panel:
PLAY ( 3 )	Press CH5°.
POWER	On the Remote:
REW ( 1 )
	a–	Press CH + or –.
		or
	b–	Press the Number keys then ENTER.
		(The channel changes after a few seconds
		whether you press ENTER or not.)
SP EP	● If you connect the TV and the VCR only using
VCR
	the RF connection, press TV/VCR on the Remote
2 3	so that the VCR mode indicator lights on the front
	display panel, to view the program to be recorded.

4
			Set tape speed
	STOP/EJECT	3 Press SP/EP to set the recording speed.
	( 7 / 0 ) PAUSE ( 8 )
			Start recording
		4 On the front panel:
			Press REC ( ¦ ).
			On the Remote:
	POWER		While holding REC ( ¦ ), press PLAY ( 3 ).

1

4

7

1

REW ( 1 )

4

2	3
		2
5	6	2–b
8	9
0		4
		2–a
		3
		FF ( Á )
		PAUSE ( 8 )
		2–b
		STOP ( 7 )

●If “VIDEO CALIBRATION” is set to “ON” (default setting: ☞ pg. 33), this VCR checks the tape con- dition for about seven seconds, then starts record- ing. (This means that the first seven seconds of the program will not be recorded. If this is incon- venient for you, follow the steps below:

1Press REC ( ¦ ) and PAUSE ( 8 ) to start Video Calibration.

2Then press PLAY ( 3 ) to start recording after Video Calibration is complete.

To pause recording

Press PAUSE ( 8). To resume recording, press PLAY ( 3 ).

To stop recording

Press STOP ( 7 ) on the Remote or STOP/EJECT ( 7 / 0 ) on the front panel.

To rewind the tape

Press REW ( 1 ).

To fast-forward the tape

Press FF ( Á ).

To eject the tape

Press STOP/EJECT ( 7 / 0 ) on the front panel when the tape is not running.

●You can also eject the cassette with the VCR turned off.

To turn off the VCR

Press POWER.