JVC HR-VP683U Input receiving channel number, Engage timer recording standby mode, Press SP/EP

Page 25
GUIDE CHANNEL SET
GUIDE CH: 12
VCR CH : –––
PRESS NUMBER KEY (0–9)
OR (5,°), THEN (OK)
PRESS (PROG.) TO END

EN 25

4Input receiving channel number

The guide channel number, which is

assigned to the TV or cable station for the

PlusCode number that you entered in step 3, will appear automatically on the Guide Channel Set screen.

Press the Number keys (or CH +/– or SHUTTLE PLUS 5°) to input the number of the channel on which the broadcast for the PlusCode number is received on the VCR, then press OK.

●The Guide Channel Set screen appears only when you input the PlusCode number of a station for which the guide channel number has not been set previously.

●If you receive your channels through a cable box, select the cable box output channel — the channel on which you view the cable box programs on the TV.

7 Return to normal screen Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

•If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs. See “When programs overlap each other” on page 31.

8Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “ä” is displayed on the front display panel.

To use the VCR while it is in timer recording standby mode

5 Check program date The PlusCode number you entered and the corresponding timer recording program is displayed on the Program screen. Check to make sure it is accurate.

PROGRAM 1

(VCR PLUS+ 12345678)

START

STOP

8:00PM

= 10:00PM

DATE

CH

12/24/00

12 SP

SAT

 

PRESS (8=DAILY, 9=WEEKLY STOP+/– = STOP TIME, SP/EP)

PRESS (PROG.) TO END

Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcasts you want.

●When “AUTO TIMER” (☞ pg. 33) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

●To change the stop time, press STOP +/–.

●To timer-record daily (Monday–Friday) or weekly serials, press DAILY (M–F)(number “8”) or WEEKLY (number “9”). “DAILY” or “WEEKLY” appears on the Program screen. Pressing the button again makes each corresponding display disappear.

●If you made a mistake, press CANCEL to access the VCR Plus+ screen again and input the correct PlusCode number.

●If an incorrect PlusCode number or the one for a broadcast already finished has been inputted, “ERROR” is displayed for about 5 seconds, then the VCR Plus+ screen reappears.

6Set tape speed

Press SP/EP.

IMPORTANT

If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong VCR CH number will be displayed on the Program screen in step 5. When this happens, set the correct guide channel number for that station. (☞ pg. 26, “VCR Plus+ Setup”)

NOTES:

●Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost if it lasts for more than 3 minutes. As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start unless its end time already passes.

●To timer-record cable channels received through a cable box, be sure to keep the cable box turned on with the correct channel selected.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents HR-VP683U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Audio OUT not supplied AC Power CordAntenna or cable Coaxial cable Flat feeder Matching transformerSituate VCR Check contentsConnect VCR to TV Final preparation for usePerform Plug & Play setup Plug & Play SettingWhat to do if Plug & Play setting failed Access Main Menu screen Language SettingAccess Initial Set screen Select language10 EN Clock SettingPreparations Select clock setSet Auto Clock to on Setting clock semiautomaticallySelect host channel Select time zoneSelect D.S.T. mode Setting clock manually12 EN Manual Clock SetAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Automatically Auto Channel SetAccess Manual Channel Set screen Setting channels manually14 EN Add or skip desired channelsLoad a cassette Basic Playback16 EN Basic Playback FeaturesChanging display information Checking tape positionSelecting monitor sound Adjusting tracking conditionAutomatic operations after Access distant code Locating beginning of timer18 EN Locating beginningRecording BasicSelect recording channel Set tape speed20 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayErase on-screen display Accidental erasure prevention 22 EN Special Effect Playback Locating particular scene Rapidly Picture Search High-Speed Picture SearchSkipping unwanted portions Viewing still pictureViewing slow motion picture Pause during playbackAccess VCR Plus+ screen VCR Plus+ Timer Programing24 EN To use the VCR while it is in timer recording standby mode Engage timer recording standby modeInput receiving channel number Press SP/EP26 EN VCR Plus+ SetupVCR Plus+ guide channel matching Input guide channel number Access Guide Channel Set screen28 EN Express Timer ProgramingPress SP/EP to set the tape speed To timer-record daily Monday-Friday or weekly serials30 EN Checking program settingsSelect program to modify Confirm overlapping programsOverlapping programs blink on the screen Change setting Useful Function Settings32 EN Select FunctionWhen this function is set to OFF When this function is set to onFor Example 34 ENHi-Fi and normal tracks Normal and Hi-Fi tracks. The main audio is not recorded36 EN PreventingConnection Edit To Or From Another38 EN TV Brand SettingTurn on the TV Set TV brand codeTurn on the cable box Cable Box Brand SettingOperate cable box Ex. To set the Remote to RCA40 EN DBS Receiver Brand SettingTurn on the DBS receiver Operate DBS receiverSet remote control code for Remote Changing Remote Control CodeUnplug VCR Plug in VCR42 EN TroubleshootingTimer Recording Can the VCR indefinitely remain in still mode? 44 ENWhat happens if the tape reaches its end during recording? Express timer recording Manual setting Preparation Semiauto settingVCR PLUS+ setup List of termsFront panel 46 ENFront display panel On-screen display Rear panel48 EN How to use the RemoteRemote Specifications 50 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-VP683U
Top Page Image Contents