JVC HR-VP683U Adjusting tracking condition, Selecting monitor sound, Automatic operations after

Page 17

EN 17

D Adjusting tracking condition

—Tracking Adjustments

Automatic tracking adjustment

This VCR automatically adjusts the tracking condition. Whenever you insert a tape and start playback, automatic tracking starts working and continuously analyzes the signal to enable optimum picture quality during playback.

Manual tracking adjustment

If automatic tracking cannot eliminate noises well during playback, use the manual tracking following the procedures below.

●You can also use the manual tracking during slow motion playback (☞ pg. 23).

1 Activate manual tracking

Press CH 5 and ° on the front panel at the same time during playback.

2 Eliminate the noises on the TV screen.

Press CH 5 and ° (or CH + and – on the Remote).

●Press it briefly for a fine adjustment, or press and hold for coarse adjustment. Watch the screen and continue adjustment until optimum picture and sound quality are achieved.

3 Reactivate automatic tracking

Press CH 5 and ° on the front panel at the same time. The automatic tracking becomes active again.

E Selecting monitor sound

— Audio Monitor

You can select the desired monitor sound.

While playing back a tape on which stereo sound or SAP sound is recorded, press A. MONITOR on the Remote. Each time you press the button, sound changes as follows:

 

 

HI-FI

 

 

 

HI-FI L

 

 

HI-FI R

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

NORM

 

 

 

 

NORM

 

 

 

HI-FI

 

 

 

 

 

 

 

 

 

HI-FI: Normally select this.

Hi-Fi sound is played back.

HI-FI L: Sound on the left Hi-Fi channel is played back.

HI-FI R: Sound on the right Hi-Fi channel is played back. NORM:Sound on the normal track is played back. NORM HI-FI:

Both sounds on the Hi-Fi track and normal track are mixed and played back.

Note:

●The above indication appears when “SUPERIMPOSE” is set to “ON” (☞ pg. 33), though the monitor sound changes in sequence.

●If the tape being played back has no Hi-Fi sound track, the normal sound track will be heard regardless of this setting.

●If RF connection (☞ pg. 6) is used for viewing pictures on the TV, sound will be monaural even though you select “HI-FI”.

●You can also use the menu to select your desired monitor sound. (☞ pg. 35)

F Automatic operations after

rewinding — Next Function Memory

The Next Function Memory “tells” the VCR what to do after rewinding is complete.

●Ensure that the VCR is in stop mode.

a– For Automatic Playback Start

Press REW ( 1 ), then press PLAY ( 3 ) within 2 seconds.

b– For Automatic Power Off

Press REW ( 1 ), then press POWER within 2 seconds.

c– For Automatic Timer Standby

Press REW ( 1 ), then press TIMER within 2 seconds.

NOTE:

It is not possible to select the Automatic Timer Standby function if the cassette’s record safety tab is removed.

Page 16 Page 18
Image 17
Page 16 Page 18
Contents HR-VP683U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Audio OUT not supplied AC Power CordAntenna or cable Coaxial cable Flat feeder Matching transformerSituate VCR Check contentsConnect VCR to TV Final preparation for useWhat to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Access Main Menu screen Language SettingAccess Initial Set screen Select language10 EN Clock SettingPreparations Select clock setSet Auto Clock to on Setting clock semiautomaticallySelect host channel Select time zoneSelect D.S.T. mode Setting clock manually12 EN Manual Clock SetAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Automatically Auto Channel Set Access Manual Channel Set screen Setting channels manually 14 EN Add or skip desired channelsLoad a cassette Basic Playback16 EN Basic Playback FeaturesChanging display information Checking tape positionAutomatic operations after Adjusting tracking conditionSelecting monitor sound Access distant code Locating beginning of timer18 EN Locating beginningRecording BasicSelect recording channel Set tape speed20 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayErase on-screen display Accidental erasure prevention22 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchSkipping unwanted portions Viewing still pictureViewing slow motion picture Pause during playback24 EN VCR Plus+ Timer ProgramingAccess VCR Plus+ screen To use the VCR while it is in timer recording standby mode Engage timer recording standby modeInput receiving channel number Press SP/EPVCR Plus+ guide channel matching VCR Plus+ Setup26 EN Input guide channel number Access Guide Channel Set screen28 EN Express Timer ProgramingPress SP/EP to set the tape speed To timer-record daily Monday-Friday or weekly serials30 EN Checking program settingsOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify Change setting Useful Function Settings32 EN Select FunctionWhen this function is set to OFF When this function is set to onFor Example 34 ENHi-Fi and normal tracks Normal and Hi-Fi tracks. The main audio is not recorded36 EN PreventingConnection Edit To Or From Another38 EN TV Brand SettingTurn on the TV Set TV brand codeTurn on the cable box Cable Box Brand SettingOperate cable box Ex. To set the Remote to RCA40 EN DBS Receiver Brand SettingTurn on the DBS receiver Operate DBS receiverSet remote control code for Remote Changing Remote Control CodeUnplug VCR Plug in VCR42 EN TroubleshootingTimer Recording What happens if the tape reaches its end during recording? 44 ENCan the VCR indefinitely remain in still mode? Express timer recording Manual setting Preparation Semiauto settingVCR PLUS+ setup List of termsFront display panel 46 ENFront panel On-screen display Rear panelRemote How to use the Remote48 EN Specifications 50 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-VP683U
Top Page Image Contents