JVC HR-VP683U manual To timer-record daily Monday-Friday or weekly serials

Page 29

EN 29

8 Set tape speed

Press SP/EP to set the tape speed.

9Return to normal screen

Press PROG. or OK.

“PROGRAM COMPLETED” appears on the screen for about 5 seconds, then normal screen appears.

•If “PROGRAM NOT COMPLETED PROGRAM OVERLAP” appears, you have another program overlapping the program you have just made.

The Program Check screen appears and conflicting programs will start blinking.

You can now correct the conflicting programs. See “When programs overlap each other” on page 31.

0Engage timer recording standby mode

Press TIMER.

The VCR turns off automatically and “ä” is displayed on the front panel display.

To timer-record daily (Monday–Friday) or weekly serials

Press DAILY (M–F)(number “8”) or WEEKLY (number “9”) anytime during steps 3 through 9.

“DAILY” or “WEEKLY” appears on the Program screen.

●Pressing the button again makes the corresponding indication disappear.

To use the VCR while it is in timer recording standby mode

Press TIMER to cancel the timer recording standby mode, then press POWER to turn on the VCR.

DO NOT forget to put the VCR into timer recording standby mode again by pressing TIMER after you use the VCR; otherwise, you cannot record the broadcast you want.

●When “AUTO TIMER” (☞ pg. 33) is set to “ON”, the timer recording standby mode is automatically engaged when the VCR is turned off. It is temporarily canceled when the VCR is turned on. You do not have to press TIMER to engage or disengage the timer recording standby mode.

NOTES:

●Even if a power failure occurs, the VCR keeps your timer programs. However, the clock time, channel settings, and other menu settings are lost if it lasts for more than 3 minutes. As a result, when the power is supplied again to this VCR after the power failure, the following will take place.

1.This VCR starts the Plug & Play setting automatically to restore the clock time and channel setting.

2.If the clock time and channel setting are restored correctly, each timer program you have made will start unless its end time already passes.

●Programs that start after midnight must have the next day’s date.

●After timer recording is completed, the VCR turns off automatically.

●You can program the timer recording while a regular recording is in progress; the menu screens will not be recorded.

●If the tape reaches its end during timer recording, the cassette is automatically ejected.

●To timer-record cable channels, be sure to keep the cable box turned on with the correct channel selected.

Page 28 Page 30
Image 29
Page 28 Page 30
Contents HR-VP683U Telephone Number Dear CustomerPower Lines Power SourcesPower Cord Protection Grounding or PolarizationDamage Requiring Service AccessoriesCleaning Replacement PartsContents Basic Connections Audio OUT not supplied AC Power CordAntenna or cable Coaxial cable Flat feeder Matching transformerSituate VCR Check contentsConnect VCR to TV Final preparation for useWhat to do if Plug & Play setting failed Plug & Play SettingPerform Plug & Play setup Access Main Menu screen Language SettingAccess Initial Set screen Select language10 EN Clock SettingPreparations Select clock setSet Auto Clock to on Setting clock semiautomaticallySelect host channel Select time zoneSelect D.S.T. mode Setting clock manually12 EN Manual Clock SetAccess Tuner Set screen Tuner SettingPerform Auto Channel Set Automatically Auto Channel SetAccess Manual Channel Set screen Setting channels manually14 EN Add or skip desired channelsLoad a cassette Basic Playback16 EN Basic Playback FeaturesChanging display information Checking tape positionAutomatic operations after Adjusting tracking conditionSelecting monitor sound Access distant code Locating beginning of timer18 EN Locating beginningRecording BasicSelect recording channel Set tape speed20 EN Basic Recording FeaturesSpecifying recording length Watching one program while recording anotherDisplay VCR status on TV screen Showing on-screen displayErase on-screen display Accidental erasure prevention22 EN Special Effect PlaybackLocating particular scene Rapidly Picture Search High-Speed Picture SearchSkipping unwanted portions Viewing still pictureViewing slow motion picture Pause during playback24 EN VCR Plus+ Timer ProgramingAccess VCR Plus+ screen To use the VCR while it is in timer recording standby mode Engage timer recording standby modeInput receiving channel number Press SP/EPVCR Plus+ guide channel matching VCR Plus+ Setup26 EN Input guide channel number Access Guide Channel Set screen28 EN Express Timer ProgramingPress SP/EP to set the tape speed To timer-record daily Monday-Friday or weekly serials30 EN Checking program settingsOverlapping programs blink on the screen Confirm overlapping programsSelect program to modify Change setting Useful Function Settings32 EN Select FunctionWhen this function is set to OFF When this function is set to onFor Example 34 ENHi-Fi and normal tracks Normal and Hi-Fi tracks. The main audio is not recorded36 EN PreventingConnection Edit To Or From Another38 EN TV Brand SettingTurn on the TV Set TV brand codeTurn on the cable box Cable Box Brand SettingOperate cable box Ex. To set the Remote to RCA40 EN DBS Receiver Brand SettingTurn on the DBS receiver Operate DBS receiverSet remote control code for Remote Changing Remote Control CodeUnplug VCR Plug in VCR42 EN TroubleshootingTimer Recording What happens if the tape reaches its end during recording? 44 ENCan the VCR indefinitely remain in still mode? Express timer recording Manual setting Preparation Semiauto settingVCR PLUS+ setup List of termsFront display panel 46 ENFront panel On-screen display Rear panelRemote How to use the Remote48 EN Specifications 50 EN HOW to Locate Your JVC Service CenterLimited Warranty HR-VP683U
Top Page Image Contents