Recording Features
COUNTER RESET
¢ | ¢ |
q
Á | 1 |
TV PROG.
DISPLAY |
|
| TV/VCR |
2 | 3 |
| |
1 |
| ||
4 | 5 | 6 |
|
7/ | 8 | 9 | C. RESET |
|
|
|
0
4
2
TV PROG.
1
3 
Á
¦ 7 8
1 | 4 | ¢ |
| ||
| 3 |
|
E
N
21
Record One Programme
While Watching Another
If your recorder is connected to the TV via AV connection, . . .
. . . press TV/VCR. The recorder's VCR indicator and the TV broadcast being recorded disappear.
SELECT CHANNEL TO
WATCH
1 Once recording is in progress, all you need to do is to set the channel controls on the TV for the station you wish to view.
●The programme selected with the TV’s channel controls appears on the TV screen while the one selected with the recorder's TV PROG. buttons is recorded on the tape.
● If a decoder is connected to the recorder (☞ pg. 33), you can select a scrambled channel as well with the TV channel controls.
Elapsed Recording Time
Indication
You can check the exact time of a recording.
SET COUNTER DISPLAY
1 Press DISPLAY until a counter reading appears on the dispay panel.
RESET COUNTER
2 Press C.(COUNTER) RESET before starting recording or playback.
●The counter is reset to “0:00:00” and shows the exact elapsed time as the tape runs.
Tape Remaining Time
DISPLAY REMAINING TIME
1 Press DISPLAY until the time remaining on the tape appears.
●By pressing the DISPLAY button, you can change the display to show the counter reading, channel position*, clock time or tape remaining time.
*channel position is not displayed during playback.
NOTE:
Depending on the type of tape used, there may be times when the tape remaining time reading may not appear right away, or is not correct. "-