SYSTEMCONNECTIONS
EN33
Connecting/
Using A
Decoder
The AV2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels.
SELECT INPUT MODE
1 Set "AV2 SELECT" to "DECODER". (☞ pg. 30)
CONNECT DECODER
TV Receiver |
RF Cable (provided)
TV Aerial
Cable
2 Connect your recorder's AV2 IN/DECODER connector to the decoder's Euroconnector using a
SET TUNER
3 Perform the procedure as described in "When Receiv- ing A Scrambled Broadcast" on page 36.
AV1 IN/OUT
AV2 IN/DECODER
Back of
HR-J648E/EH
Back of
Satellite J248E antenna
NOTE:
When Connecting A Satellite Tuner . . .
. . . if you don't have a decoder connect the satellite tuner directly to the video recorder's AV2 IN/DECODER connector.
. . . if you have a decoder, first connect the decoder to the decoder input of the satellite tuner, then connect the satellite tuner's output to the recorder's AV2 IN/DECODER connector. Refer to the instruction book for the satellite tuner and decoder.
. . . set "AV2 SELECT" to "AV2". (☞ pg. 30)
. . . to view a programme via the satellite tuner, select AU 2 mode by pressing NUMBER keys and/or TV PROG. so that
Satellite tuner
Decoder