USINGTHECONFIRMATIONSCREENEN31
Storing Channels Manually
Store channels that were not stored during Auto Channel Set.
Perform steps 1 and 2 of the previous procedure to access the Confirmation screen before continuing.
|
| ACCESS CH. SET MODE |
1 |
| MENU |
| Press and hold CH SET for more than 2 seconds. The | |
| Language screen appears. Press OK. The Ch. Set Mode | |
| menu appears. | |
2 |
| SELECT MODE |
| Press PUSH JOG%Þ to select “MANUAL CH SET”, | |
| then press OK. The Confirmation screen appears. | |
3 |
| SELECT POSITION |
| Press PUSH JOG%Þ%%until an open position in | |
| which you want to store a channel begins blinking, | |
| then press OK. The Manual Ch. Set screen appears. | |
4 |
| INPUT CHANNEL |
| The number "01" appears blinking beneath "CH". | |
| Press the NUMBER keys to input the channel number | |
you want to store. | ||
|
| ● For fine tuning adjustment, press PUSH JOG%until |
|
| the item beneath "CH" begins blinking, then press |
|
| PUSH JOG%Þ. While tuning, “F+” or |
|
| ● If necessary, to change the band between CH(regular) |
|
| and CC(cable), press PUSH JOGÞ%until CH or CC is |
|
| blinking, then press PUSH JOG %Þ to select the |
|
| band. |
|
| ● When storing a channel that sends scrambled |
|
| broadcasts, press PUSH JOG%until "DECODER" |
|
| blinks, then press PUSH JOG%Þ to set "DECODER" |
|
| to "ON" ("OFF" is the default setting). |
|
|
|
|
| ENTER NEW CHANNEL |
5 |
| INFORMATION |
| Press OK or STORE, and the Confirmation screen | |
appears. | ||
|
| |
| ● Repeat steps 3 through 5 as necessary. | |
|
|
|
|
| CLOSE CONFIRMATION |
6 |
| SCREEN |
| Press CH SET. | |
|
| |
| ● To input the station name, see page 30. | |
| ● To change positions, see "Change Station Channel | |
|
| Position" (at right). |
When Receiving A Scrambled Broadcast
Make sure that the AV2 SELECT switch is set to "DECODER" (☞ pg. 4).
1– Perform steps 1 and 2 above.
2– Press PUSH JOG%ÞÞ%to select the position of the channel broadcasting the scrambled programmes, then press OK three times.
3– Press PUSH JOG % until "DECODER" begins blinking, and set it to "ON" by pressing PUSH JOG%Þ.
4– Press OK to access the Confirmation screen.
●Repeat steps 2 – 4 for each additional channel. 5– Press CH SET.
Delete A Channel
SELECT ITEM
1 Press PUSH JOG%Þ% %until the item you want to delete begins blinking.
DELETE CHANNEL
2 Press CANCEL.
●The item directly beneath the cancelled one moves up one line.
●Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3 Press CH SET.
Change Station Channel Position
1 |
| SELECT ITEM |
| Press PUSH JOG%Þ%%until the item you want to | |
| move begins blinking. Then press OK and the station | |
name (ID) and its channel (CH) number begin blinking. | ||
2 |
| SELECT NEW POSITION |
| Press PUSH JOG%Þ%%to move the station to the new | |
| channel position, then press OK. | |
| Example: If you moved the station in position 3 to | |
|
| position 7, the stations originally in positions |
|
| move up one space. |
|
|
|
|
| ● Repeat steps 1 and 2 as necessary. |
|
|
|
|
| CLOSE CONFIRMATION |
3 |
| SCREEN |
| Press CH SET. | |
|
|
|