JVC HR-J673EU instruction manual 20 EN

Page 20

20 EN

RECORDING

Basic Recording

Turn on the TV and select the video channel (or AV mode).

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording ( pg. 21) or timer recording ( pg. 24, 26), the recording will resume automatically when power is restored to the recorder unless the recorder’s memory backup has expired.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The recorder’s power comes on automatically and the counter is reset to 0:00:00.

B Choose a programme.

Press PR +/– or the NUMBER keys to select the channel you wish to record.

C Set the tape speed. (HR-J670/672/673/470/472EU only)

Press SP/LP (p). Check the SP/LP indicator on the recorder’s front display panel to confirm the selected tape speed.

D Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

With HR-J670/672/673/470/472EU:

B.E.S.T. takes place at the beginning of both the first SP and the first LP recording after inserting the cassette. ( pg. 23)

With HR-J270/272EU:

B.E.S.T. takes place at the beginning of the first recording after inserting the cassette. ( pg. 23)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 37).

E Pause/Resume recording.

Press 9. Press 4 to resume recording.

F Stop recording.

Press 8 on the remote control or 0 on the recorder. Then press 0 to remove the cassette.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 20

Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel How To Use Operating JVC TVsCheck the contents Situate the recorderConnect the recorder to TV Connect the recorder to mainsSelect your country Auto Set UpTurn on the recorder Perform Auto Set Up Select the languagePress rt to select your language code Press rt to select Auto and press OK or ePerform Preset Download 10 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 12 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 14 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 16 ENSlow Motion High-Speed SearchVariable Speed Search Pause during playbackInstant ReView 18 ENManual Tracking Index Search Skip SearchNext Function Memory Repeat Playback20 EN Instant Timer Recording ITR Engage the ITR modeWatching Another Set the recording durationReset the counter 22 ENTape Remaining Time Set the counter displayPlayback RecordingAccess the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 24 ENSet the VPS/PDC mode Engage the recorder’s timer modeSatellite Receiver Users Guide Program Number SetExpress Timer Programming 26 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR +28 EN Cancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Engage the Auto Satellite Programme Recording modeProgramme Recording 30 ENSet the recorder’s input mode Set the edit modeEdit From a Camcorder Start the camcorderSet the input mode of recording deck Another Video Recorder32 EN Start the source playerConnecting To a Satellite Receiver Satellite receiver Decoder Back of recorderSelect the input mode 34 ENConnect the decoder Set the tunerHR-J670/672/673EU only Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingYou can set the B.E.S.T. Biconditional Equalised Signal This feature helps you to adjust the playback pictureWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder is38 EN For ExampleAbout Ntsc Playback Access the Auto Channel Set screen Tuner Set40 EN Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 42 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 44 ENSet Stations a TV Station And ID List Station NameAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 46 ENShowview Setup Guide Program Number SetGuide Program Number Enter the Guide Program number48 EN Access the Clock Set screenClock Set Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationTroubleshooting 50 ENRecording Other Problems 52 ENPlayback 54 EN Auto Set Up Connecting To a Satellite Receiver Delete a ChannelLanguage Manual Channel Set Manual Tracking Mode Set Timer warning display Tuner SetSee Instructions pg International Telephone Language CodeCountry Code

Related manuals

Manual 56 pages 11.98 Kb