JVC HR-J673EU Set the VPS/PDC mode, Engage the recorder’s timer mode, Satellite Receiver Users

Page 25

EN 25

D Set the tape speed. (HR-J670/672/673/470/472EU only)

Press SP/LP (p).

E Set the VPS/PDC mode.

Press VPS/PDC to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen or “VPS/PDC” is lit on the front display panel, VPS/PDC is set to ON.

●If “VPS/PDC OFF” is displayed on the TV screen or “VPS/PDC”

is not lit on the front display panel, VPS/PDC is set to OFF.  “VPS/PDC Recording” on page 27.

F Return to the normal screen.

Press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen and “Err” on the front display panel, see page 29.

●Repeat steps 1 – 6 for each additional programme.

G Engage the recorder’s timer mode.

Press # (TIMER). The recorder turns off automatically and # appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

NOTES:

●To Change The Stop Time . . .

. . . press STOP +/– after pressing OK in step 3. You can compensate for anticipated programme schedule delays.

●To Timer-Record Weekly Or Daily Serials . . .

. . . after pressing OK in step 3, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday — Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

●You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra

programme, you must first cancel any unnecessary programmes ( pg. 28).

●It is not possible to timer-record a TV programme with a SHOWVIEW number which starts with “0”.

Satellite Receiver Users

To timer-record a satellite broadcast using the SHOWVIEW system:

APerform “Satellite Receiver Control Setting” on page 13.

BPerform steps 1 – 7. In step 3, the front display panel shows “L-2” for the channel position. In step 5, you cannot set “VPS/PDC” to “ON”.

CLeave the satellite receiver’s power on.

ATTENTION

Guide Program Number Set

“GUIDE PROG SET” appears after performing step 3 if the Guide Program number for the SHOWVIEW number you entered has not been set.

If you want to set the Guide Program number for the satellite broadcast station, press the NUMBER key “0” to change “TV PROG” to “SAT”. Press rt to input the channel position number on which your recorder or satellite receiver receives that station, then press OK or e to set the Guide Program number. The SHOWVIEW Program screen appears.

(Example)

To timer-record a ZDF programme with the SHOWVIEW system.

* If your recorder receives ZDF on the channel position 2, press OK or e after entering “2”.

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel Operating JVC TVs How To UseSituate the recorder Check the contentsConnect the recorder to TV Connect the recorder to mainsTurn on the recorder Auto Set UpSelect your country Select the language Perform Auto Set UpPress rt to select your language code Press rt to select Auto and press OK or e10 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 12 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections14 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 16 EN Basic PlaybackHigh-Speed Search Slow MotionVariable Speed Search Pause during playbackManual Tracking 18 ENInstant ReView Skip Search Index SearchNext Function Memory Repeat Playback20 EN Engage the ITR mode Instant Timer Recording ITRWatching Another Set the recording duration22 EN Reset the counterTape Remaining Time Set the counter displayRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 24 ENEngage the recorder’s timer mode Set the VPS/PDC modeSatellite Receiver Users Guide Program Number Set26 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR +28 EN Confirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenEngage the Auto Satellite Programme Recording mode Select the L-2 Select modeProgramme Recording 30 ENSet the edit mode Set the recorder’s input modeEdit From a Camcorder Start the camcorderAnother Video Recorder Set the input mode of recording deck32 EN Start the source playerSatellite receiver Decoder Back of recorder Connecting To a Satellite Receiver34 EN Select the input modeConnect the decoder Set the tunerMake connections HR-J670/672/673EU onlyAccess the Mode Set screen Mode SetSelect the mode Select the mode settingThis feature helps you to adjust the playback picture You can set the B.E.S.T. Biconditional Equalised SignalWhen this function is set to ON, the timer is Off, and automatically disengaged when the recorder isFor Example 38 ENAbout Ntsc Playback Tuner Set Access the Auto Channel Set screen40 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 42 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 44 ENSet Stations B Station Name TV Station And ID ListExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 46 ENGuide Program Number Set Showview SetupGuide Program Number Enter the Guide Program numberClock Set Access the Clock Set screen48 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operation50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Connecting To a Satellite Receiver Delete a Channel Auto Set UpLanguage Manual Channel Set Manual Tracking Mode Set Timer warning display Tuner SetCountry Code International Telephone Language CodeSee Instructions  pg
Related manuals
Manual 56 pages 11.98 Kb
Top Page Image Contents