JVC HR-J673EU instruction manual VPS/PDC Recording, Enter the channel position, Press PR +

Page 27

EN 27

F Enter the channel position.

Press PR +/–.

Satellite Receiver Users

To timer-record a satellite broadcast using Express Timer Programming:

APerform “Satellite Receiver Control Setting” on page 13.

BPerform steps 1 – 10. In step 6, press the NUMBER key “0” to change “TV PROG” to “SAT”. The front display panel shows “L-2” for the channel position. Then press PR +/– to enter the channel position for the satellite broadcast. In step 8, you cannot set “VPS/PDC” to “ON”.

CLeave the satellite receiver’s power on.

G Set the tape speed. (HR-J670/672/673/470/472EU only)

Press SP/LP (p).

H Set the VPS/PDC mode.

Press VPS/PDC to select “ON” or “OFF”.

●If “VPS/PDC ON” is displayed on the TV screen or “VPS/PDC” is lit on the front display panel, VPS/PDC is set to ON.

●If “VPS/PDC OFF” is displayed on the TV screen or “VPS/PDC”

is not lit on the front display panel, VPS/PDC is set to OFF.  “VPS/PDC Recording” in the right column

I Return to the normal screen.

After confirming all information is correct, press PROG or OK. “PROGRAM COMPLETED” appears on the TV screen for about 5 seconds, then the normal screen appears. If “PROGRAM OVERLAPPED” appears on the TV screen and “Err” on the front display panel, see page 29.

●Repeat steps 1 – 9 for each additional programme.

J Engage the recorder’s timer mode.

Press # (TIMER). The recorder turns off automatically and # appears on the front display panel.

●To disengage the timer mode, press # (TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

. . . anytime during steps 2 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either “WEEKLY” or “DAILY” appears on the TV screen. Pressing the button again makes the corresponding indication disappear.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, “PROGRAM FULL” appears on the TV screen and “FULL” appears on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes ( pg. 28).

VPS/PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.

NOTES:

●When you use Express Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

●VPS/PDC recording is also possible when a satellite receiver or a cable system is connected to AV2 (L-2) IN/ DECODER on your recorder.

●VPS/PDC recording is also possible via the AV1 (L-1) IN/ OUT connector.

How to check if the station being received transmits a VPS/PDC signal

APress – –:– – until the channel position appears on the front display panel.

BHold down START+ for about 5 seconds.

“VPS/PDC” appears blinking on the front display panel. If a VPS/PDC signal is detected from the station, “VPS/ PDC” will stop blinking.

If no VPS/PDC signal is detected from the station, “VPS/ PDC” will blink at a slower rate.

CPress – –:– – or START+ again to return to normal display.

Page 26 Page 28
Image 27
Page 26 Page 28
Contents Video Cassette Recorder English Safety Precautions Moisture Condensation Front View Front Display Panel Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVAuto Set Up Turn on the recorderSelect your country Press rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download10 EN Set the video channelJust Clock Language for the on-screen display12 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller14 EN Setting satellite receivers brand and channelTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec 16 EN Basic PlaybackPause during playback Slow MotionHigh-Speed Search Variable Speed Search18 EN Manual TrackingInstant ReView Repeat Playback Index SearchSkip Search Next Function Memory20 EN Set the recording duration Instant Timer Recording ITREngage the ITR mode Watching AnotherSet the counter display Reset the counter22 EN Tape Remaining TimeRecording Playback 24 EN Access the Showview screen Access the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users26 EN Express Timer ProgrammingPress PR + To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position28 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify30 EN Select the L-2 Select modeEngage the Auto Satellite Programme Recording mode Programme RecordingStart the camcorder Set the recorder’s input modeSet the edit mode Edit From a CamcorderStart the source player Set the input mode of recording deckAnother Video Recorder 32 ENSatellite receiver Decoder Back of recorder Connecting To a Satellite ReceiverSet the tuner Select the input mode34 EN Connect the decoderMake connections HR-J670/672/673EU onlySelect the mode setting Mode SetAccess the Mode Set screen Select the modeOff, and automatically disengaged when the recorder is You can set the B.E.S.T. Biconditional Equalised SignalThis feature helps you to adjust the playback picture When this function is set to ON, the timer isFor Example 38 ENAbout Ntsc Playback Auto Channel Set Access the Auto Channel Set screenTuner Set 40 ENPerform Auto Channel Set View the Confirmation screenPress OK twice Manual Channel Set 42 ENDelete a Channel When Receiving a Scrambled Broadcast44 EN Set Stations aSet Stations B Station Name TV Station And ID List46 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetEnter the Guide Program number Showview SetupGuide Program Number Set Guide Program NumberAccess the Clock Set screen Clock Set48 EN Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data50 EN TroubleshootingRecording 52 EN Other ProblemsPlayback 54 EN Timer warning display Tuner Set Auto Set UpConnecting To a Satellite Receiver Delete a Channel Language Manual Channel Set Manual Tracking Mode SetInternational Telephone Language Code Country CodeSee Instructions  pg
Related manuals
Manual 56 pages 11.98 Kb
Top Page Image Contents