JVC HR-J713EU Set Vps/Pdc Mode, Engage Recorder’S, Timer Mode, VPS/PDC Recording, EN25, Screen

Page 25
ENTER CHANNEL POSITION

6

ENTER CHANNEL POSITION

Press TV PROG +/–.

– P1 –

 

START

STOP

21:00

= 22:00

 

SP

VPS/PDC OFF

 

DATE

TV PROG

 

25.12

1

 

[+/–] =

ARD

 

 

 

[PROG] : EXIT

 

 

SP

 

 

SET TAPE SPEED

7 Press SP/LP ( ) to set the tape speed.

8

SET VPS/PDC MODE

Press VPS/PDC to select "ON" or "OFF".

If "VPS/PDC ON" is displayed on the screen or "VPS/

PDC" is lit on the display panel, VPS/PDC is set to ON.

If "VPS/PDC OFF" is displayed on the screen or "VPS/PDC"

 

is not lit on the display panel, VPS/PDC is set to OFF.

 

"VPS/PDC Recording" in the right column.

 

RETURN TO NORMAL

 

SCREEN

 

After confirming all information is correct, press PROG

 

or OK. "PROGRAM COMPLETED" appears on the

9 screen for about 5 seconds, then normal screen

 

appears.

 

Repeat steps 1 9 for each additional programme.

 

ENGAGE RECORDER’S

10

TIMER MODE

Press ä (TIMER). The recorder turns off automatically

and ä appears on the display panel.

 

To disengage the timer, press ä (TIMER) again.

To Timer-Record Weekly Or Daily Serials . . .

SET VPS/PDC MODEENGAGE RECORDER’STIMER MODEEN25VPS/PDC RecordingHow to check if the station being received transmits a VPS/PDC signalManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundENManual backgroundManual background25Manual background

Satellite Tuner Users

To timer-record a satellite broadcast using Express Timer Programming:

1 Set "AV2 SELECT" to "AV2" (pg. 31).

2 Perform steps 1 10. Enter "L-2" for the channel position in step 6.

3 Set the satellite tuner to the appropriate channel before the selected programme begins.

4 Leave the satellite tuner's power on.

VPS/PDC Recording

Now available from some TV stations, PDC (Programme Delivery Control) and VPS (Video Programme System) are service designed to assure safe, accurate timer recording. With this system, special code signals are transmitted together with the audio/video signals. These code signals control your video recorder and have precedence over the advertised times you may have preset into the timer. This means that your recorder will start and stop recording when the preset TV programmes actually start and end — even if the broadcast time of a preset TV programme is changed.

NOTES:

When you use Express Timer Programming, set the start time (VPS or PDC time) exactly as advertised in the TV listing. A different time than advertised will result in no recording.

VPS/PDC recording is also possible when a satellite tuner or a cable system is connected to AV2 IN/DECODER on your recorder.

VPS/PDC recording is also possible via the AV1 IN/OUT connector.

How to check if the station being received transmits a VPS/PDC signal

1 Press –:–until the channel position appears on the display panel.

2 Hold down START+ for about 5 seconds.

"VPS/PDC" appears blinking on the display panel. If a VPS/PDC signal is detected from the station, "VPS/ PDC" will stop blinking.

If no VPS/PDC signal is detected from the station, "VPS/

PDC" will blink at a slower rate.

3 Press –:–or START+ again to return to normal display.

. . . anytime during steps 2 through 9, press WEEKLY (NUMBER key “9”) for weekly serials or DAILY (NUMBER key “8”) for daily serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears on the screen. Pressing the button again makes the corresponding indication disappear.

NOTE:

You can programme this recorder to timer-record as many as 8 programmes. If you try to programme the recorder to record a ninth, "PROGRAM FULL" appears on screen and "FULL" appears

Timer Warning

If you have programmed your recorder to timer-record a programme or a series of programmes, a warning appears on screen to tell you that the recording is to start in 5 minutes.

WARNING– TIMER RECORDING

TO START SOON

Manual background [Manual background]

on the front display panel. To record the extra programme, you must first cancel any unnecessary programmes (pg. 26).

NOTES:

The warning only appears if

you’re not in the Timer mode at that time.

If this recorder is being used as the player for tape dubbing, the warning screen is recorded on the tape in the other video recorder.

The warning blinks for the entire 5 minutes leading up to the start of timer recording. To clear the display, press Manual background.

Image 25
Contents HR-J712EU HR-J713EU CONTENTSVIDEO CASSETTE RECORDER INSTRUCTIONSSAFETYFIRST Safety PrecautionsABOUT HEAD CLEANING For ItalyINSTALLINGYOURNEWRECORDER CHECK CONTENTSBasic Connections SITUATE RECORDER4ENINITIALSETTINGS Auto Set UpAuto Channel Set/Auto Clock Set/Auto Guide Program Number Set/Auto Video Channel SetPERFORM AUTO SET UP FINISH AUTO SET UPSELECT LANGUAGE CONFIRM/SET VIDEO CHANNELPreset Download B If auto channel set has succeeded but auto clock set has not INFORMATIONC If both auto channel set and auto clock set have failed Language for the on-screen displayACCESS COUNTRY SET ACCESS MAIN MENU8ENINITIALSETTINGScont LanguageACCESS MODE SET SCREEN ENABLE/DISABLEOn-Screen Displays ON-SCREEN DISPLAYACCESS MAIN MENU Power Save Mode10ENINITIALSETTINGScont SELECT POWER SAVETV Auto Power On ACCESS MODE SETT-V Link Functions T-VLINK12EN Colour System SetMODE RETURN TO NORMAL SCREENBasic Playback Tape Position IndicatorLOAD A CASSETTE POINT14EN Playback FeaturesPLAYBACK ACTIVATE HIGH-SPEED SEARCHOVERRIDE AUTOMATIC TRACKING ADJUST TRACKINGMANUALLY RETURN TO AUTOMATICSELECT PICTURE ACCESS MODE SETCONTROL SET MODE 16ENPLAYBACKcontCHOOSE A PROGRAMME Basic RecordingSET TAPE SPEED START RECORDINGRESET COUNTER Recording FeaturesInstant Timer Recording ITR 18ENBilingual Programmes Receiving Stereo AndTo Record Stereo And Bilingual Programmes A2 To Record NICAM Stereo And Bilingual Programmes20ENRECORDINGcont B.E.S.T. Picture SystemPreparation SELECT B.E.S.T. MODEPlayback RecordingEN21 22ENTIMERRECORDING Timer ProgrammingACCESS SHOWVIEW SCREEN ACCESS SHOWVIEW PROGRAM SCREENENGAGE RECORDER’S TIMER MODE Timer WarningSET TAPE SPEED SET VPS/PDC MODE24ENTIMERRECORDINGcont Express Timer ProgrammingSTART TIME TIMESET VPS/PDC MODE TIMER MODEENGAGE RECORDER’S VPS/PDC RecordingCheck, Cancel And Replace Programmes 26ENTIMERRECORDINGcontDISENGAGE TIMER MODE ACCESS PROGRAM CHECKAuto Timer Auto SP→LP TimerEN27 SELECT MODEAutomatic Satellite Programme Recording 28ENTIMERRECORDINGcontPROG REC MODE ENGAGE AUTO SATELLITEMAKE CONNECTIONS Edit From A CamcorderSET RECORDER’S INPUT SET EDIT MODE30EN Edit To Or From Another Video RecorderSET RECORDING DECK’S INPUT MODEEN31 AV2 SELECT Setting32ENSYSTEMCONNECTIONS Connection To A Satellite TunerIf you dont have a decoder Satellite Tuner UnitIf you have a decoder EN33Decoder EXT.2SELECT INPUT MODE Connecting Using A DecoderCONNECT DECODER SET TUNEREN35 Connecting Using A Stereo SystemCAUTIONS 36ENSUBSIDIARYSETTINGS ACCESS AUTO CH SETACCESS MAIN MENU Tuner SetVIEW CONFIRMATION SCREEN PERFORM AUTO CHANNEL SETEN37 SUBSIDIARYSETTINGScont ACCESS CONFIRMATION38EN SELECT BANDDelete A Channel When Receiving A Scrambled BroadcastChange Station Channel Position EN39SWITCH STATIONS ACCESS MANUAL40ENSUBSIDIARYSETTINGScont CHANNEL SET SCREENSTATION NAME TV Station And ID ListPERFORM TUNING ACCESS MANUAL CHANNEL SET SCREEN42ENSUBSIDIARYSETTINGScont Fine-Tuning Channels Already StoredVideo Channel Set ACCESS VIDEO CHANNEL SET MODESET RF OUTPUT SYSTEM SET VIDEO CHANNELACCESS CLOCK SET ACCESS INITIAL SET44ENSUBSIDIARYSETTINGScont Clock SetCHANNEL POSITION SET JUST CLOCKSET CLOCK DATA SOURCE START CLOCK OPERATIONACCESS INITIAL SET SHOWVIEW SetupACCESS GUIDE PROG SET 46ENPOWER TROUBLESHOOTINGEN47TAPE TRANSPORT PLAYBACKTIMER RECORDING TROUBLESHOOTINGcontOTHER PROBLEMS 48ENQ. Noise bars appear during multi-speed search. What’s the problem? QUESTIONSANDANSWERSEN49Q. and ä remain lit on the display panel. Is there a problem? Q. Is it possible to timer-record a TV programme broadcast in 2000?INDEX 50ENFRONT VIEW 2 3 4 5DISPLAY PANEL REAR VIEWEN51 VPS/PDC52ENINDEXcont REMOTE CONTROLOperating JVC TVs EN53 SPECIFICATIONSTUNER/TIMER ACCESSORIESMEMO 54ENEN55 Auto Set Up - referring to the display panel HR-J712/J713EU