INSTALLINGYOURNEWRECORDER
EN3
Basic Connections
It's essential that your video recorder be properly connected. Follow these steps carefully. THESE STEPS MUST BE COMPLETED BEFORE ANY VIDEO OPERATION CAN BE PERFORMED.
CHECK CONTENTS |
Make sure the package contains all of the accessories |
1 listed in “Specifications” (☞ pg. 53). |
SITUATE RECORDER |
Aerial terminal
Back of TV
RF Cable (provided)
Mains Power
Cord
TV Aerial Cable
2 Place the recorder on a stable, horizontal surface. | ||
|
| CONNECT RECORDER TO |
3 |
| TV |
The connection method you use depends on the type of | ||
| TV you have. | |
|
| |
| RF CONNECTION | |
|
| ● To Connect To A TV With NO AV Input Terminals . . . |
|
| a– Disconnect the TV aerial cable from the TV. |
|
| b– Connect the TV aerial cable to the ANT. IN jack |
|
| on the rear panel of the recorder. |
|
| c– Connect the provided RF cable between the RF |
|
| OUT jack on the rear panel of the recorder and the |
|
| TV’s aerial terminal. |
AV CONNECTION
●To Connect To A TV With AV Input Terminals . . .
a– Connect the aerial, recorder and TV as per “RF
CONNECTION”.
b– Connect an optional SCART cable between the
AV1 IN/OUT socket on the rear panel of the recorder and the TV’s
|
|
| ENTREE |
|
|
| ANT. IN |
|
| SORTIE |
|
AV2 ENTREE/DECODEUR | AV1 ENTREE/SORTIE | OUT | ANTENNE |
R | |||
IN/DECODER | IN/OUT |
| SORTIE |
| AUDIO |
| RF OUT |
|
| L |
|
Rear view
Mains outlet | AV1 IN/OUT |
|
CONNECT RECORDER TO MAINS
4 Plug the end of the mains power cord into a mains outlet.
Make AV connection if your TV has a
After you plug the mains power cord into a mains outlet, the Country Set display appears on the TV screen and/or on the
recorder's front display panel when the button on the recorder/remote control is pressed for the first time to power on the recorder; go to page 4 to perform Auto Set Up.