JVC HR-J647MS, HR-J747MS specifications Basic Recording

RECORDING

EN15

Basic

Recording

●Turn on the TV and select the VIDEO channel (or AV mode).

●Press VCR on the remote control to select the VCR mode.

RECORD TV PROG

q

COLOURSYSTEM STOP/EJECT PLAY

1	2	3
4	5	6	SP/LP/EP
NUMBER	8
7		9

0 4

2

TV PROG

TV signals being received by the recorder’s built-in tuner can be recorded onto a video tape. You can “capture” a TV programme using your video recorder.

1	LOAD A CASSETTE
	Insert a cassette with the record safety tab intact.
	● The counter is reset to 0:00:00 and the recorder
	power comes on automatically.
	● Select the appropriate colour system by pressing the
	COLOUR SYSTEM button.(☞ pg. 26)
2	CHOOSE A PROGRAMME
	Press TV PROG +/– or the NUMBER keys to select the
	channel you wish to record.
	● The TV PROG dial can also be used to select a channel.
3	SET TAPE SPEED
	Press (SP/LP/EP). Check the SP/LP/EP indicator on
	the recorder display panel to confirm the selected tape
	speed.
4	START RECORDING
	Press and hold RECORD and PLAY on the remote
	control, or press RECORD on the recorder.
	B.E.S.T. takes place at the beginning of each first
	SP and first LP (or EP) recording after inserting the
	cassette (☞ pg. 18).
	PAUSE/RESUME
5	RECORDING
	Press PAUSE. Press PLAY to resume recording.
6	STOP RECORDING
	Press STOP on the remote control or STOP/EJECT on
	the recorder. Then press STOP/EJECT to remove the
	cassette.

1 3

¦ 7

RECORD

1 4

Á

PLAY

8 PAUSE

¢

Recording Resume Function

If there is a power outage during recording (or Instant Timer Recording or timer recording), the recording will resume automatically when power is restored to the recorder unless the recorder's memory backup has expired.

3 STOP

Accidental erasure prevention

●To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab