JVC HR-J770EK setup guide Satellite Receiver Control Setting

Page 10

10SATELLITERECEIVERCONTROL

Satellite

Receiver

Control Setting

The following procedure is required if you receive satellite channels through a satellite receiver. Around 20 seconds before VIDEO Plus+ timer recording (☞ pg. 16) or Express timer programming (☞ pg. 18) starts, the recorder sets its input mode to "L-2" and automatically switches the satellite receiver’s channels using the provided Satellite Controller.

Satellite receiver

Your recorder		Satellite Controller
		(suggested locations)
Transmitter		Satellite Controller
		Satellite Controller
Satellite receiver
DECODER	VCR	TV

21-pin SCART cable

SAT CONTROL

AV2 (L-2) IN/DECODER

Back of Recorder

Installing Satellite Controller

		SITUATE SATELLITE
1		CONTROLLER
		Place the Satellite Controller so that the path between
		its transmitter and the satellite receiver’s remote sensor
		is unobstructed.
		ATTACH SATELLITE
2		CONTROLLER
		Fix securely using the adhesive strip attached on the
		back of the Satellite Controller.
3		MAKE CONNECTIONS
		Be sure to connect the recorder’s AV2 (L-2) IN/DECODER
		connector to the satellite receiver’s 21-pin SCART connector.
		NOTE:
		When connecting your satellite receiver, refer to its
		instruction manual.

		CONNECT SATELLITE CON-
4		TROLLER TO RECORDER
		Connect the Satellite Controller to the SAT CONTROL
		connector on the rear panel.

Setting satellite receiver's brand and channel

After installation, set the satellite receiver’s brand and channel correctly; otherwise, the Satellite Controller cannot work correctly.

Turn on the TV and select the VIDEO channel (or AV mode).

		TURN ON SATELLITE
1		RECEIVER
1		Turn on the satellite receiver’s power.
		ACCESS MAIN MENU
2		SCREEN ON RECORDER
2		Press MENU.
		ACCESS INITIAL SET
3		SCREEN
		Press %Þ to move the	MAIN MENU
		highlight bar (pointer) to	MODE SET
		“INITIAL SET”, then press	MODE SET
		“INITIAL SET”, then press	AUTO CH SET
		OK or #.	MANUAL CH	SET
		OK or #.	INITIAL SET	SET
			INITIAL SET
			T

			[5°] =
			[MENU] : EXIT

Image 10

Contents HR-J770EK Safety Precautions Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide TV Aerial Cable not provided To connect to a TV with 21-pin AV input connector ScartBack of TV Back of RecorderRefer to Before performing the following procedure, make sure thatAuto for Auto Set Up function Tion pg and the TV is turned on,Progress, this process will be interrupted Or remote control until the display panelShows either the display as illustrated on You will need to start again. See Notes belowIf auto channel set has succeeded but auto clock set has not If both auto channel set and auto clock set have failedTurn on the Recorder TV Auto Power OnLink Functions NexTView LinkSatellite Receiver Control Setting Enter Satellite RECEIVER’S Brand Access SAT Control SET ScreenCheck Result of Test Find Programme Start Point PlaybackLoad a Cassette Start PlaybackPause During Playback Activate HIGH-SPEED SearchRecording Engage ITR Mode Select Preset to WatchReset Counter SET Counter DisplayAccess Video PLUS+ Program Screen Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode NumberTimer Warning PDC RecordingEnter Programme Start Time Express Timer ProgrammingBefore performing Express Timer Programming TimeReturn to Normal SET PDC ModeTimer Mode Engage RECORDER’SReturn to Timer Mode Check, Cancel And Replace ProgrammesCancel or Replace a Programme Return to Normal SCREEN/ DisplayTo cancel a programme When programmes overlap each otherCancel or Change Programme Setting Confirm Overlapping ProgrammesPlayback/ Recording According To Tape Charac- teristics S.T. Picture SystemPlayback RecordingOr press Record on the recorder Sections Looking For Scene You WantSkip Over Unwanted Activate Index SearchSoundtrack Selection Selecting Sound You WantReceiving Nicam Stereo And Bilingual Programmes During PlaybackSatellite Receiver Unit Aerial Pin AV input Connector ScartAutomatic Satellite Programme Recording TV Aerial cableAccess Main Menu Screen Override Automatic Tracking Playback Picture AdjustmentAdjust Tracking ManuallySelect Picture Control SET Mode Access Main Menu ScreenAccess Mode SET Screen Minimizing Picture Degradation While EditingEdit From Camcorder SET RECORDER’S Input ModeSET Edit Mode Start CamcorderSET Recording DECK’S Input ModeEdit To Or From Another Video Recorder Start Source PlayerTo the AV2 L-2 IN/DECODER connector Select SettingOff. pg Other Functions ENABLE/DISABLE ON-SCREEN DisplayOn-Screen Display Power Save Mode Power SAVE, then pressAuto SP→LP Timer Auto TimerNext Function Memory Ntsc Playback Repeat PlaybackActivate Repeat Playback Connection To Stereo System Audio Cable not provided SpeakerClock Set Just ClockNumber Video Plus+ SetupGuide Program Number Set Video Channel Set Access Video Channel SET ModeExit Video Channel SET Mode SET Video ChannelWith RF Connection Perform Auto Channel SET Tuner SetAuto Channel Set After Scan Completed Screen preset positionsProcedures Is displayed on the screenInput Channel Storing Channels ManuallySelect Band Enter NEW Channel InformationFine-Tuning Channels Already Stored When Receiving a Scrambled BroadcastChange Station Preset Position Delete a ChannelChannel SET Screen Access ManualSwitch Stations Select NEW StationTV Station And ID List TV Station Channel Number Guide Ä remain lit on the display panel. Is there Problem? Questions And AnswersWhat happens if the tape runs out during recording? Troubleshooting Timer Recording Won’t stopIndex Front ViewProgramme Time Indicators show the programme Audio OUT L/R Connectors enableSymbolic Mode Indicators Tape Speed Indicators display mode of recording lightRemote Control Fast Forward FF Button fast-forwards tape VCR, TV PR +/-,TV +/-, TV MutingDA4 Double Azimuth helical J770EKMaximum recording time VHF 44.5 143/143 470 MHz