JVC HR-J770EK setup guide Edit To Or From Another Video Recorder, SET Recording DECK’S, Input Mode

Edit To Or

From Another

Video

Recorder

– –:– –

1 2 3

2

4 5 6

7 8 9

4

AUX 0

PR

1 ?

NOTES:

●All necessary cables can be obtained from your dealer.

●When you select "EDIT" to dub tapes in step 3, be sure to select "AUTO" (or "NORM" when "B.E.S.T." is set to "OFF") after you finish dubbing the tapes.

●When you use this recorder as the player for editing, be sure to set "O.S.D." to "OFF" before starting (☞ pg. 33).

31

You can use your video recorder as the source player or as the recording deck.

1	MAKE CONNECTIONS
	Connect the player’s 21-pin SCART connector to the
	recorder’s 21-pin SCART connector as illustrated below.
	When Using Your Video Recorder As The Source
	Player . . .
	. . . connect its AV1 (L-1) IN/OUT connector to the
	recording deck.
	When Using Your Video Recorder As The Recording
	Deck . . .
.	. . . connect its AV2 (L-2) IN/DECODER or AV1 (L-1)
	IN/OUT connector to the source player.

	SET RECORDING DECK’S
	INPUT MODE
	Set to AUX. With this video recorder, press AUX and/or
	PR to select “L-1” for the AV1 (L-1) IN/OUT connector,
2 or “L-2” for the AV2 (L-2) IN/DECODER connector,
	depending on the connector being used.
	● When using the AV2 (L-2) IN/DECODER connector,
	set "L-2 SELECT" to the appropriate mode. (☞ pg. 32)
3	SET EDIT MODE
	See "Picture Control" on page 29.
4	START SOURCE PLAYER
	Engage its Play mode.
5	START RECORDING DECK
	Engage its Record mode.

TV Receiver Player Your recorder

	21-pin SCART Cable
VIDEO	(not provided)
CHAN-
NEL or	RF Cable
AV mode
	(provided)

Recorder Your recorder TV Receiver

21-pin SCART Cable	RF Cable
	(provided)	VIDEO
(not provided)
		CHAN-
		NEL or
		AV mode

Another recorder

Another recorder

Recorder

Player