JVC HR-S4500U manual Turn on DBS Receiver, Select DBS Receiver

20ENINITIALSETTINGS(cont.)

Turn on the TV and select the VCR channel 3 or 4 (or AV mode).

POWER MENU

OK

CH

POWER

1 2 3

2

4 5 6

7 8 9

0 4

1

3 OK

MENU

TIME SCAN

Set DBS Receiver Output

Channel & DBS Receiver

Brand

1	TURN ON DBS RECEIVER
	Select a channel other than channel 55, 100 or 205 on
	your DBS receiver.
2	TURN ON THE VCR
	Press POWER.
	● Set the VCR to the channel (3 or 4 or F-1 or L-1) on
	which the signals from the DBS receiver are received.
	ACCESS MAIN MENU
3	SCREEN
	Press MENU.
	ACCESS INITIAL SET
4	SCREEN
	Press CH5° or TIME SCAN %Þ to move the highlight
	bar (arrow) to “INITIAL SET”, then press OK or TIME
	SCAN #.
	ACCESS DBS RECEIVER SET
5	SCREEN
	Press CH5°or TIME		INITIAL SET
	SCAN %Þ to move the	CLOCK SET
	highlight bar (arrow) to
		LANGUAGE ENGLISH
	“DBS RECEIVER SET”, then	GUIDE CHANNEL SET
	press OK or TIME SCAN #.	CABLE BOX SET
		=DBS RECEIVER SET
		SELECT WITH (5,°) AND (OK)
		PRESS (MENU) TO END
	SELECT DBS RECEIVER
6	OUTPUT CHANNEL
	Your selection depends on	DBS RECEIVER SET
	how your DBS receiver is
	connected to your VCR.
			OFF
	If your DBS receiver is
	connected to your VCR
	using an RF connection . . .
	. . . press CH 5° or TIME	PRESS (5,°), THEN (OK)
		PRESS (MENU) TO END
	SCAN %Þ until the
	channel number
	representing the DBS receiver's output (CH3 – CH4)
	appears on the screen.
	If your DBS receiver is connected to your VCR's
	FRONT AUDIO/VIDEO IN connectors . . .
	. . . press CH 5° or TIME SCAN %Þ until "ON F-1
	(FRONT)" appears on the screen.
	If your DBS receiver is connected to your VCR’s REAR
	AUDIO/VIDEO IN connectors . . .
	. . . press CH 5° or TIME SCAN %Þ until "ON L-1
	(REAR)" appears on the screen.