EN39
TimeScan
Names of
Speed
Audio output
| Reverse |
|
|
| Forward |
| ||||
|
|
|
|
|
|
|
|
|
| |
Search |
|
| Play |
| *Still | Play | Search | |||
|
|
|
|
|
|
|
| |||
| 0 | 1/18 × 1/6 × | 1 × | 2 × 3 × | 5 × 7 × | |||||
Audio is output. |
| Audio is | Audio is | Audio is |
| Audio is output. | ||||
| not output. | output. | not output. |
| ||||||
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
*Still mode cannot be engaged using the TIME SCAN buttons. Still mode can only be engaged by pressing the PAUSE button.
●The speed is shown in the upper right corner of the TV screen for approx. 5 seconds.
●The TimeScan search speed is the same for SP and EP recordings.
●To resume normal playback, press PLAY.
●When using the VCR's TIME SCAN SHUTTLE ring, the playback speed may not change depending on how far it is turned.
●When using the VCR's TIME SCAN SHUTTLE ring, the playback speed will change up to 7× and
●Picture may be distorted at the position where the recording speed is switched.
●The picture may be noisy for a moment when you change the playback speed.
●During
●Depending on the tape in use, noise may appear or the upper part of the picture may be distorted.
●Picture may appear distorted in comparison to normal playback.
●In TimeScan mode there will be a time lag between the video and the audio and noise may appear in the audio signal.
●TimeScan sound quality will differ in comparison to normal playback.
●When material such as music videos where there is
●When the playback direction is reversed, it takes approximately 6 seconds until sound is heard.
If you don't want to hear TimeScan audio, set "TIMESCAN AUDIO" to "OFF" (☞ pg. 40).
0
1
4
SKIP SEARCH
Skip Search
SKIP OVER UNWANTED SECTIONS
1 Press SKIP SEARCH 1 to 4 times during playback. Each press initiates a
NOTES:
●To return to normal playback during a Skip Search, press PLAY.