JVC HR-S4500U manual Automatic Sat- ellite Program Recording, Prog REC Mode

Page 50

50ENTIMERRECORDING(cont.)

Automatic Sat- ellite Program Recording

REC LINK

7 8 9

0 4

This facility allows you to automatically record a satellite program which is timer-programmed on your external satellite receiver. Connect a satellite receiver to the VCR's rear AUDIO/ VIDEO IN or S VIDEO IN* (L-1) connectors and program the timer on the satellite receiver; the VCR starts recording when the signals input from the satellite receiver to the rear AUDIO/VIDEO IN or S VIDEO IN (L-1) connectors, and when there is no input signals the VCR stops recording and the power shuts off.

* If you have connected the satellite receiver to the VCR's

S VIDEO IN connector, set "REAR AUX INPUT" to "S-VIDEO" at the Function screen (☞ pg. 52 – 53).

Before performing the following steps:

●Program the timer on the satellite receiver.

●Insert a cassette with the safety tab in place.

1

 

SET TAPE SPEED

 

Press SP/EP to set the tape speed.

 

 

 

ENGAGE AUTO SATELLITE

2

 

PROG REC MODE

 

Press and hold REC LINK for about 2 seconds. The

 

button lights up and the VCR turns off automatically.

 

● To disengage the Auto Satellite Prog Rec mode, press

 

 

 

 

REC LINK. The button's light goes off.

 

 

● If the VCR's power is off, it is not possible to engage

 

 

the Auto Satellite Prog Rec mode.

1

SP/EP

NOTES:

ATTENTION

●Be sure not to turn on the satellite receiver before the program is executed; otherwise, the VCR will start recording when the satellite receiver's power is turned on.

●If you have connected another appliance other than a satellite receiver to the rear AUDIO/VIDEO IN or S VIDEO IN (L-1) connectors, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the VCR will start recording when the connected appliance's power is turned on.

●Auto Satellite Prog recording and timer-recording cannot be done at the same time.

●Auto Satellite Prog recording is not possible with the front AUDIO/VIDEO IN (F-1) connectors.

●When the Auto Satellite Prog Rec mode is engaged or the VCR's power is turned off after Auto Satellite Prog recording is finished, the VCR will not enter the Timer mode even though "AUTO TIMER" is set to "ON".

●For timer programming of the satellite receiver, refer to the instruction manual of the satellite receiver.

●Auto Satellite Prog recording is not possible if your satellite receiver does not have a timer.

●The REC LINK button's light blinks while Auto Satellite Prog recording is in progress.

●Pressing the VCR's POWER button while Auto Satellite Prog recording is in progress turns off the VCR's power and disengages the Auto Satellite Prog Rec mode.

●If there is more than one satellite program you wish to record with Auto Satellite Prog Recording, it is not possible to set a different tape speed for each; the tape speed selected in step 1 will apply to all the programs for Auto Satellite Prog recording.

●The Active Video Calibration (☞ pg. 32) does not work while Auto Satellite Prog recording is in progress.

●Auto Clock (☞ pg. 9) does not work when the Auto Satellite Prog Rec mode is engaged.

●Depending on the type of satellite receiver, the VCR may not record a short portion at the beginning of the program or may record slightly longer than the actual length of the program.

●If you engage the Auto Satellite Prog Rec mode when the satellite receiver's power is on, the VCR will not start Auto Satellite Prog recording even though the REC LINK button's light blinks. When the satellite receiver shuts off once and is turned back on again, the VCR starts recording.

●You can also record a program from your cable system in the same way if the system has a timer and is connected to the VCR's rear AUDIO/VIDEO IN or S VIDEO IN (L-1) connectors.

●When you press the VCR's REC LINK button to engage the Auto Satellite Prog Rec mode, if the REC LINK button does not light but instead blinks quickly even though your satellite receiver's power is off, Auto Satellite Prog Recording will not work properly with that satellite receiver*.

If this is the case, perform "Express Timer Programming" (☞ pg. 45) to timer-record a satellite program.

* Some satellite receivers output signals even if the power is off. Auto Satellite Prog Recording is not possible with those satellite receivers.

Page 49 Page 51
Image 50
Page 49 Page 51
Contents HR-S4500U Dear Customer Do not place the VCRPower Lines Power SourcesPower Cord Protection Grounding or PolarizationCleaning AccessoriesDamage Requiring Service Replacement PartsContents Connections Matching Transformer not supplied Connect VCR to TVEN I Nitial Sett Ings Plug & Play SetupPlug & Play Auto Clock Set/Auto Tuner SetInformation Language Preparation Access Clock SET ScreenClock Scan #Select Host Channel Select D.S.T. ModeSET Auto Clock to on Semi-AutoSET Time Select Time ZoneReturn to Normal Screen SET DateSET Access Main Menu ScreenTuner Set Receivable ChannelsAdd Or Delete a Channel Access ManualChannel Time Scan #Attach Controller Cable Box ControlSituate Controller Connect Cable BOX to VCRSelect Cable BOX Access Cable BOX SETTurn on Cable BOX Output ChannelBrand Code Access Cable BOX Brand SET ScreenEnter Cable BOX Brand Connect DBS Receiver To VCR Fasten securely using the supplied adhesive stripsDBS Receiver Control DBS receiverSet DBS Receiver Output Channel & DBS Receiver Brand Turn on DBS ReceiverSelect DBS Receiver JVC Dish Network Echostar Dish Network Access DBS ReceiverDBS Receiver Code from Following list, then Press OK JVCFind Program Start Point Simple PlaybackLoad a Cassette Start PlaybackSimple Recording EN Playba CK and Recording Feat Ures Playback FeaturesActivate FRAME-BY Frame Playback Still Picture/Frame-By- Frame PlaybackAdjust Manual Tracking Access Distant CodeEngage Manual Tracking Mode Start SearchCH 5 or Time Scan Playb a CK and Recording FeaturesVideo Stabilizer Time Scan #to set toStop Repeat Reset Counter to ZeroStart Repeat Activate Instant ReviewMode SuperimposeSelect The Soundtrack SET ModeSelect Audio Monitor Advance Access Skip MenuPerform Movie Movie AdvanceAV Compu Link Playback ExampleActive Video Calibration Video CalibrationPlayback RecordingRecording Features VHS Super VHS, S-VHS ET and VHS Super VHS ET Select S-VHS ET SET ModeEngage S-VHS ET Mode Stereo And SAP Second Audio Program Access Function SET ScreenSelect 2ND Audio Record SET Mode To Record SAP ProgramsTime Scan Audio signal during TimeScanOutput audio signal is normal monaural sound Variable-Speed Search/ Reverse Motion PlaybackSpeed Audio output Skip Over Unwanted SectionsSkip Search Reverse Forward Search Play Slow-Motion Still × -5×-3×TimeScan Audio Place MenuNumber VCR Plus+ Timer ProgrammingTimer Recording Check Program Data Engage Timer ModeEN Timer Recording Initial SET, then press VCR Plus+ SetupVCR Plus+ Guide Channel Matching OK or Time Scan #Input Guide Channel Number Access Guide Channel SET ScreenEx. When inputting the Guide Channel number 6 for WNJUInd Input Receiving Channel NumberSET Channel Number Express Timer ProgrammingSET Program Date Band indication TV or Catv Press SP/EP to set the tape speedSet to OFF pg , Or DBS appears underCheck, Cancel And Revise Programs Cancel or Revise aRE-ENGAGE Timer ProgramAuto Timer Select Auto SP EP Timer SET ModeAuto SP→EP Timer Or Time Scan %ÞSET Recording Duration Instant Timer Recording ITREngage ITR Mode Press REC on the front panelBefore performing the following steps Prog REC ModeAutomatic Sat- ellite Program Recording Edit To Or From Another Edit From a Camcorder EditingRecord mode. Refer to camcorders instruction Arrow to Tape DUBScan #to set to on ManualLocate Start Point Insert EditingLocate END Point END Insert Editing Engage Insert EditingStart Editing Start Dubbing Audio DubbingEngage Audio Dubbing END Audio DubbingTurn on the TV Speci AL FeaturesTV Multi-Brand Remote Control SET TV Brand CodeTurn on the Cable BOX EN Special FeaturesCable Box Multi-Brand Remote Control Operate Cable BOXEnter DBS Receiver Brand DBS Receiver Multi-Brand Remote ControlTurn on the DBS Receiver Operate DBS ReceiverPlug in Power Cord Unplug Vcrs PowerSET Remote Control Turn VCR Power onTroubleshooting Cassette gets stuck partwayTimer again RoubleshootingOther Problems When scanning channels, someCan the VCR indefinitely remain in the Record-Pause mode? EN Questions and AnswersCan the VCR indefinitely remain in the still mode? What happens if the tape runs out during recording?Index Express Timer ProgrammingMBR Multi-Brand Remote Code Setting List Of TermsFront View Rear View Remote Control 20C to 60C -4F to140F Video connectors in x 1, OUT xSpeci Fications HOW to Locate Your JVC Service Center For Servicing Only in U.S.AWarranty Only in U.S.A. EN Limited WarrantyHR-S4500U
Top Page Image Contents