JVC HR-S7600EK Express Timer Programming, Enter Programme Start Time, Enter Programme Date

18BASICOPERATIONS(cont.)

Express Timer

Programming

Before performing Express Timer Programming:

●Make sure that the recorder's built-in clock is set properly.

●Insert a cassette with the safety tab in place. The recorder will come on automatically.

●Turn on the TV and select the VIDEO channel (or AV mode).

1 – –:– –

If you don’t know the PlusCode number for the programme you wish to record, use the following procedure to set your recorder to timer-record the programme.

ACCESS VIDEO PLUS+
SCREEN
1 Press PROG.
ACCESS PROGRAMME
SCREEN
Press START +/–. (If you’re			– P1 –
just starting out, “P1”		START			STOP
2 appears.)
		– –:– –	=		– –:– –
		SP		VPS/PDC OFF
		DATE			TV PROG
		– –.– –				– –
	[+/–] =
	[PROG] : EXIT
The front display panel looks like this:
	SP

8		1	DAILY2
		2
	DC	4	5
		7	8
			0

1

1,9 PROG 2

START+/–

2,3		–
	4	STOP+/

￿

3	WEEKLY	7
6	SP/LP
9
	3		10
	4
	4	OK 9
	3
		TV PROG+/–
	DATE+/		6
		–
		5

	ENTER PROGRAMME
	START TIME
	Press START +/– to enter			– P1 –
	the time you want
3 recording to start.			START			STOP
			21:00	=		– –:– –
	● Press and hold START		SP		VPS/PDC OFF
	+/– to move in 30-		DATE			TV PROG
	minute increments, or
			– –.– –				– –
	press and release
	repeatedly to move 1	[+/–] =
		[PROG] : EXIT
	minute at a time.
	The front display panel looks like this:
		SP

	ENTER PROGRAMME STOP
4	TIME
	Press STOP +/– to enter the time you want recording to
	stop.
	● Press and hold STOP +/– to move in 30-minute
	increments, or press and release repeatedly to move 1
	minute at a time.

ENTER PROGRAMME DATE

5 Press DATE +/– to enter the date on which you wish to record. (The current date first appears on screen. The date you enter will appear in its place.)