JVC HR-S7600EK setup guide Video Plus+ Setup, Guide Program Number Set

(Ex.) If CH4 is received on preset position 4.

[5°] = [MENU] : EXIT

54

SUBSIDIARYSETTINGS(cont.)

VIDEO Plus+ Setup

IMPORTANT

Normally, Auto Set Up (☞ pg. 8), Preset Download (☞ pg. 9) or Auto Channel Set (☞ pg. 46) sets the Guide Program Numbers automatically. You need to set the Guide Program Numbers manually only in the following cases.

●When timer-programming with VIDEO Plus+, the preset position, where the station you wish to record is received on your recorder, is not selected or when you add a channel after Auto Set Up or Auto Channel Set has taken place.

— Set the Guide Program Number for that station manually.

●When you delete a channel or change preset positions manually after Auto Set Up or Auto Channel Set has taken place.

— Set the Guide Program Numbers for all the receivable stations manually.

●When you wish to timer-record a satellite programme with VIDEO Plus+.

— Set the Guide Program Numbers for all satellite broadcasts received on your satellite receiver.

Turn on the TV and select the VIDEO channel (or AV mode).

Guide Program Number Set

	ACCESS MAIN MENU
1	SCREEN
	Press MENU.
	ACCESS INITIAL SET
2	SCREEN
	Press %Þ to move the highlight bar (pointer) to
	"INITIAL SET", then press OK or #.
	ACCESS GUIDE PROG SET
3	SCREEN
	Press %Þ to move the highlight bar (pointer) to "GUIDE
	PROG SET", then press OK or #.
	ENTER GUIDE PROG
4	NUMBER
	Press %Þ or NUMBER			GUIDE PROG SET
	keys to enter the Guide
	Program number for the
	desired station as shown in		GUIDE PROG		TV PROG
	the TV listings. Then press
				4	5
	OK or #.
		[5°] =
			[MENU] : EXIT
		(Ex.) When inputting the
				Guide Program
				number 4 for CH4.

ENTER RECEIVING PRESET POSITION NUMBER

Press %Þ or NUMBER		GUIDE PROG SET
keys to input the number
5 of the recorder's preset
position on which the	GUIDE PROG		TV PROG
Guide Program number's
		4	4
broadcast is received.
			CH4
Then press OK or #.

● If the satellite broadcast is received on your recorder's auxiliary channel "L-2", select "L-2" for the preset position.

• Repeat steps 4 and 5 as necessary.

RETURN TO NORMAL

SCREEN

6 Press MENU.

Guide Program Number

"Guide Program (GUIDE PROG) number" refers to the assigned TV station numbers, according to broadcast area, for VIDEO Plus+ timer recording. The Guide Program numbers can be found in most TV listings.