JVC HR-S5967EK, LPT0768-001B manual Advanced features

Page 36

36

advanced features

programme satellite receiver Enter the details of the programme into your satellite receiver (see receiver manual) and put a tape in the VCR.

set tape speed Press / on the Remote Control to set the tape speed to either SP or LP.

engage vcr in auto mode Press and hold SATc()on the VCR for about 2 seconds. The SATcindicator on the VCR display panel lights up and the VCR turns off automatically. Any signal detected at the L-2 IN/DECODER connecter will automatically start the VCR recording; when the signal stops, so will the VCR.

Notes

connectors Auto Satellite Prog Recording is only possible using the L-2 IN/DECODER connec- tor.

timer mode You cannot put the VCR into TIMER MODE when using Auto Satellite Prog Recording Mode.

rThe number of programmes recorded will not be displayed on the VCR display panel when the rbutton is pressed.

timer recording Auto Satellite Prog Recording is not possible if your satellite receiver does not have a timer.

indicator The SATcindicator light flashes when Auto Satellite Prog Recording is in progress.

disengage To disengage the VCR during Auto Satellite Prog Recording, press the obutton. The VCR will stop recording and turns off.

tape speed When recording two or more programmes consecutively, you cannot set a different tape speed for each programme. The first speed selected will apply to all programmes in that recording session.

b.e.s.t. The B.E.S.T. system will not work during Auto Satellite Prog Recording.

just clock Just Clock does not work when in Auto Satellite Prog Recording mode.

incoming signal The VCR will only react to the start of an incoming signal at the L-2 IN/ DECODER connecter. If you try to engage Auto Satellite Prog Recording Mode whilst the satellite receiver is powered on, the SATcindicator light will flash but the VCR will not record. You must power the satellite receiver off then on again to begin recording in these circumstances.

cable input You can record in the same way from a cable system as long as you connect the cable system has a timer on/off function and is connected to the L-2 IN/DECODER connector.

incompatibilities Some satellite receivers output signals even when turned off. These receiv- ers cannot be used with this VCR in this way.

Page 35 Page 37
Image 36
Page 35 Page 37
Contents HR-S5965EK HR-S5966EK HR-S5967EK Safety Precautions If in doubt consult a competent electricianMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Rear panel Diagram Key Front PanelWelcome to JVC Getting Everything ReadyScart and rf Auto Setup Three-Step Quick StartCheck the Results Finish OffThree-step quick start Basic Features Playback Load a Video CassettePlay Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardPlayback Features Pause During PlaybackSingle Frame Movement Slow Motion Variable Speed SearchPicture Search Recording Choose a ProgrammeSet the Tape Speed Start RecordingResetting the Counter Display Tape Remaining TimeChange Display Information Instant Timer Recording Recording Resume FunctionVideo Plus + Timer Programming Get to the Video Plus + ScreenEnter the PlusCode Number Return to Normal Screen Engage Timer Mode Express Timer Programming Get to the Programme ScreenEnter Programme Details Return to Normal Screen Check, Cancel & Change Programmes Press c, then press oto disengage the timer modeAdvanced Features Picture Quality Manual TrackingVideo Stabilizer Picture Control Tape Type Super VHS ET S-VHS ETSuper VHS S-VHS, S-VHS ET and VHS To record in S-VHSRecording and Playback Using B.E.S.T Avoiding B.E.S.T. Time DelayTurning B.E.S.T. on or OFF Sound Modes Nicam Stereo and Bilingual BroadcastsSoundtrack Selection Finding Specific Scenes Skip SearchIndex Search Instant ReviewAuto Satellite Auto Record from Satellite ReceiverAdvanced features Output Setting EditingInput Setting For L-2 InputEditing Using Another VCR Your VCR as the Player Other Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerAuto Timer Auto Power Off/3HRepeat Playback Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorAccess Video Channel Mode Exit Video Channel Set ModeVideo Channel Set Set Video ChannelAuto Channel Setup Tuner SetManual Channel Setup ITVChange Station Name Delete a ChannelChange Station Preset Position Fine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Setting the Clock Clock SetQuestion and Answers PlaybackTroubleshooting Symptom Possible CauseRecording Other Problems List of Terms Memo Memo HR-S5965/5966EK/5967EK
Top Page Image Contents