JVC HR-S5967EK, LPT0768-001B manual Clock Set, Setting the Clock

Page 52

52

advanced features

Clock Set

You should only need to perform this function if:

Auto Clock Set was not performed correctly by Auto Setup, Preset Download or Auto Channel Set

The VCR’s memory backup has expired

You want to change the Just Clock setting

Setting the Clock

get to the initial set screen Press

. Move the highlight bar to INITIAL SET using the

PR

and PR

buttons and press

(or E).

get to the clock set screen Move the highlight bar to CLOCK SET using the PR and PR

buttons and press (or E).

set time and date When the CLOCK SET screen appears, the time will be blinking. Use the PR and PR buttons to set the correct time (pressing and holding will

advance the time in 30 minute increments) and then press

 

CLOCK SET

 

(or E). The date will blink. Use the

PR and PR

buttons to

TIME

DATE

 

YEAR

set the correct date (pressing and holding will advance the date in

 

0: 00

01 . 01

 

03

15 day increments) and then press

 

(or E). Set the correct

 

JUST CLOCK : ON

 

 

TV PR.

:

1

year in the same way and press

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[1] a k

 

 

 

 

 

 

 

[MENU]: EXIT

 

 

set just clock Set as desired using the PR and

PR buttons

 

 

 

 

then press

(or E).

 

 

 

 

 

 

 

set preset for clock data source If you have set JUST CLOCK to ON, you will need to specify a preset (station) for JUST CLOCK to take its source data from. Use the PR and PR

buttons to select the preset and press (or E).

start clock operation Press .

NOTE:

If the recorder’s memory backup has expired or the AC was disconnected from the recorder, the recorder will automatically perform Auto Clock Set when the power is restored.

Notes on Just Clock

Some TV stations transmit a time signal with their broadcasts. This VCR has the ability to use this signal to update its internal clock (including the adjustment for British Summer Time). It will do this every hour except for 23:00, 00:00, 01:00 and 02:00. By setting Just Clock to ON, you are enabling the VCR to do this.

Just Clock is not effective in the following circumstances:

when the VCR is powered on

when the VCR is in Timer or Auto Satellite Programme Recording modes

when a difference of more than 3 minutes between the internal clock and the time signal exists.

when reception conditions are poor.

Image 52
Contents HR-S5965EK HR-S5966EK HR-S5967EK Safety Precautions If in doubt consult a competent electricianMoisture Condensation Some Do’s And Don’ts On The Safe Use Of EquipmentContents Rear panel Diagram Key Front PanelWelcome to JVC Getting Everything ReadyScart and rf Auto Setup Three-Step Quick StartCheck the Results Finish OffThree-step quick start Basic Features Playback Load a Video CassettePlay Stop & EjectVideo Heads Cleaning Rewind and Fast ForwardPause During Playback Playback FeaturesSingle Frame Movement Variable Speed Search Slow MotionPicture Search Recording Choose a ProgrammeSet the Tape Speed Start RecordingDisplay Tape Remaining Time Resetting the CounterChange Display Information Instant Timer Recording Recording Resume FunctionGet to the Video Plus + Screen Video Plus + Timer ProgrammingEnter the PlusCode Number Return to Normal Screen Engage Timer Mode Get to the Programme Screen Express Timer ProgrammingEnter Programme Details Return to Normal Screen Check, Cancel & Change Programmes Press c, then press oto disengage the timer modeAdvanced Features Manual Tracking Picture QualityVideo Stabilizer Picture Control Tape Type Super VHS ET S-VHS ETSuper VHS S-VHS, S-VHS ET and VHS To record in S-VHSAvoiding B.E.S.T. Time Delay Recording and Playback Using B.E.S.TTurning B.E.S.T. on or OFF Nicam Stereo and Bilingual Broadcasts Sound ModesSoundtrack Selection Finding Specific Scenes Skip SearchIndex Search Instant ReviewAuto Satellite Auto Record from Satellite ReceiverAdvanced features Output Setting EditingInput Setting For L-2 InputEditing Using Another VCR Your VCR as the Player Other Functions On-Screen Display O.S.DPower Save Mode Auto SP aLP TimerAuto Timer Auto Power Off/3HRepeat Playback Next Function MemoryConnection to a Stereo System AUX in or Tape MonitorAccess Video Channel Mode Exit Video Channel Set ModeVideo Channel Set Set Video ChannelAuto Channel Setup Tuner SetManual Channel Setup ITVChange Station Name Delete a ChannelChange Station Preset Position Fine-Tuning Stored Channels TV Station ID GuideTV Station Channel Number Guide BBC1 BBC2 ITV CH4 CH5Setting the Clock Clock SetQuestion and Answers PlaybackTroubleshooting Symptom Possible CauseRecording Other Problems List of Terms Memo Memo HR-S5965/5966EK/5967EK