28
advanced features
Picture Quality
Manual Tracking
Your VCR is equipped with automatic tracking control. This will be adequate for most tapes and will automatically adjust the tracking to suit the particular tape in use but if you insert an old or worn tape, it may be necessary to manually adjust the track-
ing in order to get the best picture. If automatic tracking fails, you will notice noise bars appear- ing across the picture; you can correct this by manually overriding the tracking using the follow- ing steps.
override automatic tracking During playback, press /on the Remote Control to engage manual tracking.
adjust tracking manually Use the PR + or – buttons to adjust the tracking manually.
NOTES:
•Press /again to
•When a new tape is inserted, the VCR returns to automatic tracking.
Video Stabilizer
You can automatically correct vertical vibrations in the picture when playing back unstable recordings made on another VCR. The default setting is OFF.
get to the mode set screen Press 
. Move the highlight bar to MODE SET using the PR
and PR 
buttons and press 
(or E).
select video stabilizer mode Move the highlight bar to
VIDEO STABILIZER using the | PR | and PR | buttons. Press | (or | MODE SET |
|
| PREVIOUS PAGE |
| ||||
E) to set to ON. |
|
|
|
| FVIDEO STABILIZER | OFF |
|
|
|
| ON | ||
|
|
|
|
| AUTO POWER OFF | OFF |
return to normal screen Press 
.
NOTES:
[1] a k [MENU]: EXIT
• When you finish viewing a tape, be sure to set this function to OFF.
•Regardless of the setting, this function has no effect during recording and during special effects playback.
•The
•To watch recordings with