JVC LPT0768-001B, HR-S5967EK manual Editing, Output Setting

Editing

L-1 OUTPUT Setting

The L-1 IN/OUT connector delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set L-1 OUTPUT to the appropriate mode depending on the type of unit connected to the rear panel L-1 IN/OUT connector of this VCR.

get to the output/input set screen Press . Move the highlight bar to

OUTPUT/INPUT SET using the PR and PR buttons and press (or E).

select mode Move the highlight bar to L-1

(or E) to select the desired mode:

VIDEO

FOR L-1 OUTPUT

•VIDEO : If a connected device’s input is

compatible only with regular video signals, set to VIDEO.

•S-VIDEO : If a connected device’s input is compatible with Y/C signals, set to

S-VIDEO. This setting will let you take advantage of higher-quality S-VHS pictures. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

return to normal screen Press .