JVC HR-S7722EU, HR-S7700EU 58 EN, Access the Video Channel Set mode, Set the RF output system

Page 58

58 EN

SUBSIDIARY SETTINGS (cont.)

Video Channel Set

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the recorder through the RF cable.

IMPORTANT

Perform the following steps only if —

—interference appears in the TV picture after you have moved to a different area or a new station has started broadcasting in your area.

—you change the connection between your recorder and TV from RF connection to AV or S-VIDEO connection, or vice versa.

If you have connected the recorder to your TV via the AV or S-VIDEO connection ( pg. 8, 9), since you do not need the video channel you have to set the video channel to off.

If you have connected the recorder to your TV via the RF connection ( pg. 8), you have to set the correct video channel.

Before performing the following steps:

Make sure the recorder’s power is off and there is no cassette inserted in the recorder.

A Access the Video Channel Set mode.

Hold down 0 on the recorder until the front display panel shows the following.

B Set the RF output system.

The blinking number on the display indicates the RF output system of your country.

●If you have selected MAGYARORSZÁG (36), CESKÁ REPUBLIKA (42), POLSKA (48), РОССИЯ (07) or OTHER EASTERN EUROPE (EE) for the country setting ( pg. 10, 14), press rt to set to “2”.

●For other countries, set to “1”. Then press OK. (1: B/G 2: D/K)

Then set your TV to UHF channel 50.

●If the two vertical white bars appear clearly on the TV screen as shown to the right, go to step 4.

●If the two vertical white bars do not appear clearly, re-set the video recorder to another vacant channel and try again.

NOTES:

●If you set the video recorder to a channel which is occupied by a local station or has neighbouring channels that are occupied by local stations, the picture reception quality will be affected and some interference noise will appear on the TV screen. Be sure to select a vacant channel which has no broadcast on neighbouring channels.

●If you cannot obtain the two vertical white bars clearly with any channel between 22 and 69, consult your JVC dealer.

D Exit the Video Channel Set mode.

Press OK on the remote control.

C Set the video channel.

With AV or S-VIDEO Connection

Press PR – until the front display panel shows “1OUT– –” (or “2OUT– –”).

●Now the video channel is set to off.

With AV or S-VIDEO Connection

To view picture signals from the video recorder, set your TV to its AV mode.

With RF Connection

The channel on which the TV screen in step 3 appears clearly is your video channel.

To view picture signals from the video recorder, set your TV to the video channel.

With RF Connection

Press PR + or – to set the video recorder to a vacant channel between 22 and 69 which is not occupied by any local station in your area.

(Example) If channel 50 is available in your area

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Video Cassette Recorder Safety Precautions For Italy Moisture CondensationFront View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsPlug the end of the mains power cord into a mains outlet 8To connect to a TV with S-VIDEO/AUDIO in connectorsVideo Connection Turn on the recorder Auto Set Up10 EN Select your countryPress rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download12 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 14 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 16 ENNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec Basic Playback 18 ENPause during playback Slow MotionVariable Speed Search Activate frame-by-frame playbackHigh-Speed Turbo Search 20 ENSkip Search Instant ReViewManual Tracking Index SearchNext Function Memory Digital TBC/NRSoundtrack Selection 22 ENRepeat Playback Activate Repeat PlaybackSet the tape speed Recording Resume FunctionChoose a programme Start recording24 EN Instant Timer Recording ITREngage the ITR mode Watching AnotherTape Remaining Time Reset the counterEngage the S-VHS ET mode Set the counter displayRetake 26 ENReceiving Stereo and Bilingual Programmes Playback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 34 ENEdit From a Camcorder Set the recorder’s input modeSet the edit mode Start the camcorder1 Input 1 OutputPress rt to move 2 Select Decoder connector2 Input Another Video Recorder 38 ENYour recorder Recorder Audio Dubbing 40 ENEnd Audio Dubbing Engage the Audio Dubbing modeStart dubbing Press AUX Number key 0 and/or PR to select F-1 or S-1Insert Editing 42 ENLocate the end point Engage the Insert Editing modeAV Insert Editing Start EditingConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode46 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingPicture Control Auto TimerDirect REC 50 EN Auto Splp TimerPower Save Digital 3RColour System VHSAbout Ntsc Playback 52 EN Access the Auto Channel Set screenTuner Set Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations a 56 ENSet Stations B TV Station And ID List Station NameVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 58 ENGuide Program Number Showview SetupGuide Program Number Set Enter the Guide Program numberClock Set Access the Clock Set screen60 EN Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationTroubleshooting 62 ENRecording Other Problems 64 ENPlayback 66 EN TUNER/TIMERAccessories GeneralTape Position Indicator Tape Remaining Time Audio Dubbing Auto Channel Set Auto Set UpPreset Download Delete a Channel Timer Warning Display Tuner SetInternational telephone Language code Before YOU Start Please Make Sure ThatCountry code
Top Page Image Contents