JVC HR-S7711EU Recording Resume Function, Choose a programme, Set the tape speed, Start recording

Page 23

RECORDING

EN 23

Basic Recording

Turn on the TV and select the video channel (or AV mode).

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording ( pg. 24) or timer recording ( pg. 28, 30), the recording will resume automatically when power is restored to the recorder unless the recorder’s memory backup has expired.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The recorder’s power comes on automatically and the counter is reset to “0:00:00”.

B Choose a programme.

Press PR +/– or the NUMBER keys to select the channel you wish to record.

C Set the tape speed.

Press SP/LP (p). Check the SP/LP indicator on the recorder’s front display panel to confirm the selected tape speed.

D Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

B.E.S.T. takes place at the beginning of both the first SP and the first LP recording after inserting the cassette. ( pg. 27)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 49).

E Pause/Resume recording.

Press 9. Press 4 to resume recording.

F Stop recording.

Press 8 on the remote control or 0 on the recorder. Then press 0 to remove the cassette.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Image 23

Contents Video Cassette Recorder Safety Precautions Moisture Condensation For ItalyFront View Front Display Panel ON-SCREEN Display Operating JVC TVs How To UseConnect the recorder to mains Check the contentsSituate the recorder Connect the recorder to TVVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet Select your country Auto Set Up10 EN Turn on the recorderPress rt to select Auto and press OK or e Perform Auto Set UpSelect the language Press rt to select your language codePress rt to select CH - and press OK or e Perform Preset Download12 EN Set the video channelJust Clock Language for the on-screen display14 EN Access the Main Menu screenAccess the Country Set screen LanguageMake connections Installing Satellite ControllerSituate the Satellite Controller Attach the Satellite Controller16 EN Setting satellite receivers brand and channelVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link 18 EN Basic PlaybackActivate frame-by-frame playback Slow MotionVariable Speed Search Pause during playbackInstant ReView 20 ENSkip Search High-Speed Turbo SearchDigital TBC/NR Index SearchNext Function Memory Manual TrackingActivate Repeat Playback 22 ENRepeat Playback Soundtrack SelectionStart recording Recording Resume FunctionChoose a programme Set the tape speedWatching Another Instant Timer Recording ITREngage the ITR mode 24 ENSet the counter display Reset the counterEngage the S-VHS ET mode Tape Remaining TimeReceiving Stereo and Bilingual Programmes 26 ENRetake Recording Playback28 EN Access the Showview screenAccess the Showview Program screen Before performing the Showview Timer ProgrammingGuide Program Number Set Set the VPS/PDC modeEngage the recorder’s timer mode Satellite Receiver Users30 EN Express Timer ProgrammingPress PR+ To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Enter the channel position32 EN Overlapping programmes blink on the TV screen Cancel or change programme settingConfirm the overlapping programmes Select the programme to modify34 EN Select the L-2 Select modeRecording mode Programme RecordingStart the camcorder Set the recorder’s input modeSet the edit mode Edit From a CamcorderPress rt to move 1 Output1 Input 2 Input Decoder connector2 Select 38 EN Another Video RecorderYour recorder Recorder 40 EN Audio DubbingPress AUX Number key 0 and/or PR to select F-1 or S-1 Engage the Audio Dubbing modeStart dubbing End Audio Dubbing42 EN Insert EditingStart Editing Engage the Insert Editing modeAV Insert Editing Locate the end pointSimple Connections Connecting To a Satellite ReceiverPerfect Connections Set the tuner Select the input mode46 EN Connect the decoderMake connections Connecting/Using a Stereo SystemSelect the mode setting Mode SetAccess the Mode Set screen Select the modeDirect REC Auto TimerPicture Control Digital 3R Auto Splp TimerPower Save 50 ENAbout Ntsc Playback VHSColour System Auto Channel Set Access the Auto Channel Set screenTuner Set 52 ENPress OK twice Perform Auto Channel SetView the Confirmation screen Manual Channel Set 54 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations B 56 ENSet Stations a Station Name TV Station And ID List58 EN Access the Video Channel Set modeExit the Video Channel Set mode Video Channel SetEnter the Guide Program number Showview SetupGuide Program Number Set Guide Program Number60 EN Access the Clock Set screenClock Set Start the clock operation Set the date and timeSet Just Clock Set the source channel position for clock data62 EN TroubleshootingRecording 64 EN Other ProblemsPlayback General TUNER/TIMERAccessories 66 ENTimer Warning Display Tuner Set Audio Dubbing Auto Channel Set Auto Set UpPreset Download Delete a Channel Tape Position Indicator Tape Remaining TimeCountry code Before YOU Start Please Make Sure ThatInternational telephone Language code