JVC HR-S7711EU, HR-S7700EU, HR-S7722EU specifications Safety Precautions

Page 2

2 EN	SAFETY FIRST

Safety Precautions

The rating plate and the safety caution are on the rear of the unit.

WARNING: DANGEROUS VOLTAGE INSIDE

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

CAUTION

8When you are not using the recorder for a long period of time, it is recommended that you disconnect the power cord from the mains outlet.

8Dangerous voltage inside. Refer internal servicing to qualified service personnel. To prevent electric shock or fire hazard, remove the power cord from the mains outlet prior to connecting or disconnecting any signal lead or aerial.

WARNING

There are two different types of SECAM colour systems: SECAM-L, used in FRANCE (also called SECAM- West), and SECAM-B, used in Eastern European countries (also called SECAM-East).

1.This recorder can also receive SECAM-B colour television signals for recording and playback.

2.Recordings made of SECAM-B television signals produce monochrome pictures if played back on a video recorder of SECAM-L standard, or do not produce normal colour pictures if played back on a PAL video recorder with SECAM-B system incorporated (even if the TV set is SECAM-compatible).

3.SECAM-L prerecorded cassettes or recordings made with a SECAM-L video recorder produce monochrome pictures when played back with this recorder.

4.This recorder cannot be used for the SECAM-L standard. Use a SECAM-L recorder to record SECAM-L signals.

IMPORTANT

8Please read the various precautions on page 2 and 3 before installing or operating the recorder.

8It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic work embodied therein.

●Cassettes marked “S-VHS” and “VHS” can be used with this video cassette recorder. However, S-VHS recordings are possible only with cassettes marked “S-VHS”.

By using the S-VHS ET function, it is possible to record and play back with S-VHS picture quality on VHS cassettes with this recorder.

●SHOWVIEW is a registered trademark of Gemstar Development Corporation. The SHOWVIEW system is manufactured under licence from Gemstar Development Corporation.

Image 2

Contents Video Cassette Recorder Safety Precautions For Italy Moisture CondensationFront View Front Display Panel ON-SCREEN Display How To Use Operating JVC TVsConnect the recorder to TV Check the contentsSituate the recorder Connect the recorder to mainsVideo Connection 8To connect to a TV with S-VIDEO/AUDIO in connectorsPlug the end of the mains power cord into a mains outlet Turn on the recorder Auto Set Up10 EN Select your countryPress rt to select your language code Perform Auto Set UpSelect the language Press rt to select Auto and press OK or eSet the video channel Perform Preset Download12 EN Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockLanguage Access the Main Menu screenAccess the Country Set screen 14 ENAttach the Satellite Controller Installing Satellite ControllerSituate the Satellite Controller Make connectionsSetting satellite receivers brand and channel 16 ENVCR Auto Standby Direct Rec TV Auto Power OnNexTView Link Basic Playback 18 ENPause during playback Slow MotionVariable Speed Search Activate frame-by-frame playbackHigh-Speed Turbo Search 20 ENSkip Search Instant ReViewManual Tracking Index SearchNext Function Memory Digital TBC/NRSoundtrack Selection 22 ENRepeat Playback Activate Repeat PlaybackSet the tape speed Recording Resume FunctionChoose a programme Start recording24 EN Instant Timer Recording ITREngage the ITR mode Watching AnotherTape Remaining Time Reset the counterEngage the S-VHS ET mode Set the counter displayReceiving Stereo and Bilingual Programmes 26 ENRetake Playback RecordingBefore performing the Showview Timer Programming Access the Showview screenAccess the Showview Program screen 28 ENSatellite Receiver Users Set the VPS/PDC modeEngage the recorder’s timer mode Guide Program Number SetExpress Timer Programming 30 ENEnter the channel position To Timer-Record Weekly Or Daily SerialsVPS/PDC Recording Press PR+32 EN Select the programme to modify Cancel or change programme settingConfirm the overlapping programmes Overlapping programmes blink on the TV screenProgramme Recording Select the L-2 Select modeRecording mode 34 ENEdit From a Camcorder Set the recorder’s input modeSet the edit mode Start the camcorderPress rt to move 1 Output1 Input 2 Input Decoder connector2 Select Another Video Recorder 38 ENYour recorder Recorder Audio Dubbing 40 ENEnd Audio Dubbing Engage the Audio Dubbing modeStart dubbing Press AUX Number key 0 and/or PR to select F-1 or S-1Insert Editing 42 ENLocate the end point Engage the Insert Editing modeAV Insert Editing Start EditingConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Connect the decoder Select the input mode46 EN Set the tunerConnecting/Using a Stereo System Make connectionsSelect the mode Mode SetAccess the Mode Set screen Select the mode settingDirect REC Auto TimerPicture Control 50 EN Auto Splp TimerPower Save Digital 3RAbout Ntsc Playback VHSColour System 52 EN Access the Auto Channel Set screenTuner Set Auto Channel SetPress OK twice Perform Auto Channel SetView the Confirmation screen 54 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a ChannelSet Stations B 56 ENSet Stations a TV Station And ID List Station NameVideo Channel Set Access the Video Channel Set modeExit the Video Channel Set mode 58 ENGuide Program Number Showview SetupGuide Program Number Set Enter the Guide Program number60 EN Access the Clock Set screenClock Set Set the source channel position for clock data Set the date and timeSet Just Clock Start the clock operationTroubleshooting 62 ENRecording Other Problems 64 ENPlayback 66 EN TUNER/TIMERAccessories GeneralTape Position Indicator Tape Remaining Time Audio Dubbing Auto Channel Set Auto Set UpPreset Download Delete a Channel Timer Warning Display Tuner SetCountry code Before YOU Start Please Make Sure ThatInternational telephone Language code