JVC HR-S8500E/EH specifications Automatic Satellite Programme Recording, Prog REC Mode

Page 32

32ENTIMERRECORDING(cont.)

Automatic

Satellite

Programme

Recording

8

 

6

 

5/8

REC LINK

q

1

Á

 

 

 

ATTENTION

●Be sure not to turn on the satellite tuner before the programme is executed; otherwise, the recorder will start recording when the satellite tuner's power is turned on.

●If you have connected another appliance other than a satellite tuner to the AV2 IN/DECODER connector, be sure not to engage the Auto Satellite Prog Rec mode; otherwise, the recorder will start recording when the connected appliance's power is turned on.

●Auto Satellite Prog recording and timer-recording cannot be done at the same time.

This facility allows you record automatically a satellite programme which is timer-programmed on your external satellite tuner. Connect a satellite tuner to the recorder's AV2 IN/DECODER connector and programme the timer on the satellite tuner; the recorder starts recording when the signals input from the satellite tuner to the AV2 IN/DECODER connector, and when there is no input signals the recorder stops recording and the power shuts off.

Before performing the following steps:

●Make sure the satellite tuner is connected to the recorder's AV2 IN/DECODER connector. (☞ pg. 46)

●Programme the timer on the satellite tuner.

●Insert a cassette with the safety tab in place.

SELECT AV2 SELECT MODE

1 Set "AV2 SELECT" to "SAT" (☞ pg. 39).

SET TAPE SPEED

2 Press SP/LP ( ) to set the tape speed.

ENGAGE AUTO SATELLITE

PROG REC MODE

Press and hold REC LINK for about 2 seconds. The

button lights up and the recorder turns off

3 automatically.

● To disengage the Auto Satellite Prog Rec mode, press

REC LINK. The button's light goes off.

● If the recorder's power is off, it is not possible to

engage the Auto Satellite Prog Rec mode.

NOTES:

●Auto Satellite Prog recording is possible with the AV2 IN/DECODER connector only.

●For timer programming of the satellite tuner, refer to the instruction manual of the satellite tuner.

●Auto Satellite Prog recording is not possible if your satellite tuner does not have a timer.

●The button's light blinks while Auto Satellite Prog recording is in progress.

●Pressing the recorder's button while Auto Satellite Prog recording is in progress turns off the recorder's power and disengage the Auto Satellite Prog Rec mode.

●If there are more than one satellite programme you wish to record with Auto Satellite Prog Recording, it is not possible to set the different tape speed per each; the tape speed selected in step 2 will be applicable to all the programmes for Auto Satellite Prog recording.

●The B.E.S.T. system (☞ pg. 24) does not work while Auto Satellite Prog recording is in progress.

●Just Clock (☞ pg. 58) does not work when the Auto Satellite Prog Rec mode is engaged.

●Depending on the type of satellite tuner, the recorder may not record a slight portion of the beginning of the programme or may record slightly longer than the actual length of the programme.

●If you engage the Auto Satellite Prog Recording mode when the satellite tuner's power is on, the recorder will not start Auto Satellite Prog recording even though the button's light blinks. When the satellite tuner shuts off once and is turned back on again, the recorder starts recording.

●When the Auto Satellite Prog Rec mode is engaged or the recorder's power is turned off after Auto Satellite Prog recording is finished, the recorder will not enter the Timer mode even though "AUTO TIMER" is set to "ON".

●After Auto Satellite Prog recording, the number of recorded programmes will not be displayed on the front display panel for the Instant ReView function (☞ pg. 15).

●You can also record a programme from your cable system in the same way if the system has a timer.

●When you press and hold the recorder's REC LINK button to engage the Auto Satellite Prog Rec mode, if the REC LINK button does not light but instead blinks quickly even though your satellite tuner's power is off, Auto Satellite Prog Recording will not work properly with that satellite tuner*.

If this is the case, perform "Express Timer Programming" (☞ pg. 28) to timer-record a satellite programme.

* Some satellite tuners output signals even if the power is off. Auto Satellite Prog Recording is not possible with those satellite tuners.

Page 31 Page 33
Image 32
Page 31 Page 33
Contents HR-S8500E/EH Safety Precautions For Italy Do not place the recorderCheck Contents Basic ConnectionsSituate Recorder Connect Recorder to MainsBack of Recorder Video ConnectionConnect Recorder to TV If you are referring to the on-screen display Auto Set UpIf you are referring to the front display panel Supplied with your TV set for how to do this Language CodeVia the provided RF cable only RF connection Your Video ChannelIf both auto channel set and auto clock set have failed Language for the on-screen displayJust Clock Just Clock onLanguage On-Screen Displays Power Save Mode OK or% Colour System SetAbout Ntsc Playback Basic Playback Load a CassettePoint Start PlaybackPlayback Features PlaybackStill Picture/Frame-By-Frame Playback Slow MotionAdjust Tracking Activate HIGH-SPEED SearchManually Return to AutomaticDigital 3R Digital TBC/NRActivate Spatializer SpatializerSoundtrack Selection During PlaybackAudio signal during TimeScan Time JOG & Scan IndicatorTimeScan Variable-Speed SearchSpeed SP Speed LP Audio output TimeScanTimeScan Audio Basic Recording Recording Features Engage ITR ModeSelect Channel to Watch SET Recording DurationMode Locate Start PointResume Recording RetakeAdjust Audio Hi-Fi Audio Recording Level ControlReceiving Stereo And Bilingual Programmes To Record Stereo And Bilingual Programmes A2Highlight bar pointer to MODE%SET, then press S.T. Picture SystemPreparation Recording PlaybackOr press Record on the recorder During B.E.S.TTimer Programming Timer Warning Satellite Tuner UsersExpress Timer Programming Before performing Express Timer ProgrammingStart Time TimeSET VPS/PDC Mode Timer ModeEngage RECORDER’S VPS/PDC RecordingCheck, Cancel And Replace Programmes Press Again to check More information. EachTime you press Next programmes Information appearsAuto SP→LP Timer Auto TimerBefore performing the following steps Prog REC ModeAutomatic Satellite Programme Recording Remote Control Functions Remove Power SupplySET Remote Control Code RE-SUPPLY PowerTV Multi-brand Remote Control Control Your TV Using Additional ButtonsSET TV Brand Code Operate TVSatellite Tuner Multi-Brand Remote Control SET Satellite TunerBrand Code Operate Satellite TunerEditing Mode Setting Preparation For EditingReturn to Normal Screen Advantages Of S-VHS Video RecordersIf the camcorder has no S-VIDEO output connector Recorder If the camcorder has an S-VIDEO output connector RecorderEdit From Camcorder PlayerInput Mode SET Edit ModeEdit To Or From Another Video Recorder Make ConnectionsHR-S8500EHR-S8500EH AV2 Select SettingRecorder Player SET Input Mode Reset the CounterInsert Editing Locate END PointStart Editing END Insert EditingRandom Assemble Editing Locate EDIT-IN Point Locate EDIT-OUT PointStart R.A. Edit END R.A. EditAudio OUT Audio DubbingEngage Audio Dubbing Start Dubbing END Audio DubbingSwitch Connection To a Satellite TunerSatellite Tuner Unit AV2 IN/DECODERConnecting Using a Decoder Select Input ModeConnect Decoder SET TunerRear View Connecting Using a Stereo SystemAudio Cable not provided Speaker Access Video Channel SET Mode Exit Video Channel SET ModeVideo Channel Set SET Video ChannelTuner Set Auto Channel SetPerform Auto Channel SET View Confirmation ScreenEnter NEW Channel Information Storing Channels ManuallyChange Station Channel Position When Receiving a Scrambled BroadcastDelete a Channel Access Manual Switch StationsChannel SET Screen Select NEW StationTV Station And ID List Station NamePerform Tuning Fine-Tuning Channels Already StoredSelect Channel to FINE-TUNE Press OK twice. The Manual Channel Set screen appearsShowview Setup NumberEnter Receiving Channel Position Number Guide Program Number SetAccess Initial SET Screen Access Clock SET ScreenClock Set SET Date and TimeStart Clock Operation SET Just ClockSET Clock Data Source Channel Position No power is applied to the recorder Remote control wont functionMains power cord is disconnected If you’re using the RF OUT connec- tionTimer Recording EN Questions and Answers Ä remain lit on the display panel. Is there Problem?Open the lid to access covered buttons/connectors IndexEN Index Remote Control Specifications Maximum recording timeMemo HR-S8500E/EH Ex. Francais is selected for BelgiumInternational Telephone Language Code For More Information see INSTRUCTIONS/P6
Top Page Image Contents