JVC HR-S8500E/EH Connecting Using a Decoder, Select Input Mode, Connect Decoder, SET Tuner

Page 47

Connecting/

Using A

Decoder

EN47

The AV2 IN/DECODER connector can be used as an input terminal for an external decoder (descrambler). Simply connect a decoder and you can enjoy the variety of programming that is available through scrambled channels.

SELECT INPUT MODE

1 Set "AV2 SELECT" to "DECODER". (☞ pg. 39)

CONNECT DECODER

Connect your recorder's AV2 IN/DECODER connector

TV Receiver

RF Cable (provided)

TV Aerial

Cable

		to the decoder's Euroconnector using a 21-pin SCART
2 cable.
3		SET TUNER
	Perform the procedure as described in "When Receiving
		A Scrambled Broadcast" on page 53.

AV1 IN/OUT

AV2 IN/DECODER

Satellite antenna

Satellite tuner

Decoder

NOTE:

When Connecting A Satellite Tuner . . .

. . . if you don't have a decoder connect the satellite tuner directly to the video recorder's AV2 IN/DECODER connector.

. . . if you have a decoder, first connect the decoder to the decoder input of the satellite tuner, then connect the satellite tuner's output to the recorder's AV2 IN/DECODER connector. Refer to the instruction book for the satellite tuner and decoder. See page 46 as well for the connections.

. . . set "AV2 SELECT" to "SAT". (☞ pg. 39)

. . . to view a programme via the satellite tuner, select L-2 mode by pressing NUMBER keys and/or TV PROG so that

"L-2" appears on the display panel.

Image 47

Contents HR-S8500E/EH Safety Precautions Do not place the recorder For ItalyConnect Recorder to Mains Check ContentsBasic Connections Situate RecorderBack of Recorder Video ConnectionConnect Recorder to TV If you are referring to the on-screen display Auto Set UpIf you are referring to the front display panel Your Video Channel Supplied with your TV set for how to do thisLanguage Code Via the provided RF cable only RF connectionJust Clock on If both auto channel set and auto clock set have failedLanguage for the on-screen display Just ClockLanguage On-Screen Displays Power Save Mode OK or% Colour System SetAbout Ntsc Playback Start Playback Basic PlaybackLoad a Cassette PointSlow Motion Playback FeaturesPlayback Still Picture/Frame-By-Frame PlaybackReturn to Automatic Adjust TrackingActivate HIGH-SPEED Search ManuallyDigital TBC/NR Digital 3RDuring Playback Activate SpatializerSpatializer Soundtrack SelectionVariable-Speed Search Audio signal during TimeScanTime JOG & Scan Indicator TimeScanSpeed SP Speed LP Audio output TimeScanTimeScan Audio Basic Recording SET Recording Duration Recording FeaturesEngage ITR Mode Select Channel to WatchRetake ModeLocate Start Point Resume RecordingTo Record Stereo And Bilingual Programmes A2 Adjust AudioHi-Fi Audio Recording Level Control Receiving Stereo And Bilingual ProgrammesHighlight bar pointer to MODE%SET, then press S.T. Picture SystemPreparation During B.E.S.T RecordingPlayback Or press Record on the recorderTimer Programming Satellite Tuner Users Timer WarningTime Express Timer ProgrammingBefore performing Express Timer Programming Start TimeVPS/PDC Recording SET VPS/PDC ModeTimer Mode Engage RECORDER’SNext programmes Information appears Check, Cancel And Replace ProgrammesPress Again to check More information. Each Time you pressAuto Timer Auto SP→LP TimerBefore performing the following steps Prog REC ModeAutomatic Satellite Programme Recording RE-SUPPLY Power Remote Control FunctionsRemove Power Supply SET Remote Control CodeOperate TV TV Multi-brand Remote ControlControl Your TV Using Additional Buttons SET TV Brand CodeOperate Satellite Tuner Satellite Tuner Multi-Brand Remote ControlSET Satellite Tuner Brand CodeAdvantages Of S-VHS Video Recorders Editing Mode SettingPreparation For Editing Return to Normal ScreenPlayer If the camcorder has no S-VIDEO output connector RecorderIf the camcorder has an S-VIDEO output connector Recorder Edit From CamcorderMake Connections Input ModeSET Edit Mode Edit To Or From Another Video RecorderHR-S8500EHR-S8500EH AV2 Select SettingRecorder Player Locate END Point SET Input ModeReset the Counter Insert EditingEND Insert Editing Start EditingRandom Assemble Editing END R.A. Edit Locate EDIT-IN PointLocate EDIT-OUT Point Start R.A. EditAudio OUT Audio DubbingEngage Audio Dubbing END Audio Dubbing Start DubbingAV2 IN/DECODER SwitchConnection To a Satellite Tuner Satellite Tuner UnitSET Tuner Connecting Using a DecoderSelect Input Mode Connect DecoderRear View Connecting Using a Stereo SystemAudio Cable not provided Speaker SET Video Channel Access Video Channel SET ModeExit Video Channel SET Mode Video Channel SetAuto Channel Set Tuner SetView Confirmation Screen Perform Auto Channel SETStoring Channels Manually Enter NEW Channel InformationChange Station Channel Position When Receiving a Scrambled BroadcastDelete a Channel Select NEW Station Access ManualSwitch Stations Channel SET ScreenStation Name TV Station And ID ListPress OK twice. The Manual Channel Set screen appears Perform TuningFine-Tuning Channels Already Stored Select Channel to FINE-TUNEGuide Program Number Set Showview SetupNumber Enter Receiving Channel Position NumberSET Date and Time Access Initial SET ScreenAccess Clock SET Screen Clock SetStart Clock Operation SET Just ClockSET Clock Data Source Channel Position If you’re using the RF OUT connec- tion No power is applied to the recorderRemote control wont function Mains power cord is disconnectedTimer Recording Ä remain lit on the display panel. Is there Problem? EN Questions and AnswersIndex Open the lid to access covered buttons/connectorsEN Index Remote Control Maximum recording time SpecificationsMemo For More Information see INSTRUCTIONS/P6 HR-S8500E/EHEx. Francais is selected for Belgium International Telephone Language Code