JVC HR-J255EK, HR-J455EK Access Manual Channel SET Screen, Select NEW Station, Close Confirmation

34SUBSIDIARYSETTINGS(cont.)

Set Stations (A)

Set station names that are registered in your recorder.

Perform steps 1 and 2 of "Storing Channels Manually" on page 32 to access the Confirmation screen before continuing.

1		SELECT ITEM
		Press %Þuntil the item you want begins blinking.
		ACCESS MANUAL
2		CHANNEL SET SCREEN
		Press OK twice.
3		SELECT NEW STATION
		Press%until the station
		name (ID) begins blinking,
		then press %Þ until the	PR	CH	ID	FINE
	new station’s name (ID)		06	CH45	– – – –	+/–
	you want to store begins
	blinking.		[5°] : CHANGE ID
	Registered station names
			[°°] : CURSOR +=
	(☞ pg. 35) appear as you
			: OK
		press %Þ.	[MENU] : EXIT
4		SWITCH STATIONS
		Press OK.
		● The Confirmation screen appears.
		● Repeat steps 1 through 4 as necessary.
		CLOSE CONFIRMATION
5		SCREEN
		Press MENU.

Set Stations (B)

Set station names other than the ones registered in your recorder.

Perform steps 1 and 2 of "Storing Channels Manually" on page 32 to access the Confirmation screen and then perform step 1 and 2 of "Set Stations (A)" on the left before continuing.

SELECT STATION NAME

CHARACTER

1	Press	%until the first letter
	of the station name begins
	blinking.				PR	CH	ID	FINE
					06	CH45	BBC1	+/–
					[5°] : A-Z, 0-9
					[°°] : CURSOR +=
						: OK
					[MENU] : EXIT
	ENTER NEW CHARACTER
	Press %Þto cycle through the characters (A–Z, 0–9, –,
	*	[		%
	, +,		(space) ) and stop when the desired character
2 is indicated, then press					to enter. Enter the remaining
	characters the same way (maximum of 4).
	After entering all characters, press OK.

●The Confirmation screen appears.

● If you make a mistake, press% until the incorrect character begins blinking. Then enter the correct character by pressing %Þ.

CLOSE CONFIRMATION SCREEN

3 Press MENU.