JVC HR-J255EK, HR-J455EK, HR-J255ES, HR-J256EK QU ICK SET UP Guide, Tune the TV to Video Recorder

Page 6

6

QUICKSETUPGUIDE(cont.)

STEP

3

VIDEO CHANNEL SET

TUNE THE TV TO VIDEO RECORDER

Video channel (RF output channel) is the channel on which your TV receives picture and sound signals from the video recorder through the RF cable.

●If you have connected the video recorder to your TV via both an RF cable and a 21-pin SCART cable (AV connection), you do not need the video channel so you have to set the video channel to off. — Go to "With AV Connection" below.

●If you have connected the video recorder to your TV via an RF cable only (RF connection), you have to set the correct video channel — Go to "With RF Connection" on page 7.

1	2	3
		2
4	5	6
7	8	9
	0	4
1	?

With AV Connection

Before performing the following procedure, make sure that:

■the mains power cord is plugged into the mains outlet.

■the video recorder is turned off and there is no cassette inserted in the recorder.

■batteries have been installed in the remote control.

1Press and hold down STOP(5/8) on the recorder until the display panel shows the following.

2Press TV PROG – until the display panel shows "–OUT– –".

● Now the Video Channel is set to off.

3Press to turn off the recorder.

To view picture signals from the video recorder, set your TV to its AV mode. — Refer to the instructions supplied with your TV set for how to do this.

AFTER YOU FINISH THIS STEP Go to Step 4 – AUTO SET UP

Image 6

Contents HR-J455EK HR-J256EK HR-J255EK HR-J255ES Safety Precautions Do not place the recorderSome Dos And Donts On The Safe Use Of Equipment Quick SET UP G Uide Connect Video Recorder to TV Back of TVBack of Recorder QU ICK SET UP Guide Tune the TV to Video RecorderWith RF Connection Uick SET UP Guide If auto channel set has succeeded but auto clock set has not Point PlaybackLoad a Cassette Start PlaybackStill Picture/Frame-By-Frame Playback PlaybackSearch Slow MotionRecording Engage ITR Mode Select Preset to WatchReset Counter SET Counter DisplayAccess Video PLUS+ Video Plus+ Timer ProgrammingAccess Video PLUS+ Screen Enter Pluscode NumberReturn to Normal SET PDC ModeTimer Mode Engage RECORDER’SExpress Timer Programming Access ProgrammeScreen SET PDC Mode SET Tape SpeedCheck, Cancel And Replace Programmes Activate Instant Review Looking For Scene You WantActivate Index Search Skip Over UnwantedSelect B.E.S.T. Mode Access Main Menu ScreenAccess Mode SET Screen Playback/ Recording According To Tape Charac- teristicsRecording PlaybackManually Playback Picture AdjustmentAdjust Tracking TrackingAutomatic Satellite Programme Recording Before performing the following stepsInput Mode Edit To Or From Another Video RecorderMake Connections Start Camcorder SET RECORDER’S Input ModeEdit From a Camcorder Start RecorderENABLE/DISABLE ON-SCREEN Display Access Main Menu ScreenAccess Mode SET Screen Other FunctionsReturn to Normal Screen Auto SP→LP TimerAuto Timer Return to Normal ScreenNtsc Playback Activate RepeatRepeat Playback Next Function MemoryConnection To Satellite Receiver Satellite Receiver UnitTuner Set Perform Auto Channel SETAuto Channel Set View Confirmation Screen Storing Channels Manually Change Station Preset Position Fine-Tuning Channels Already StoredDelete a Channel Close Confirmation Access Manual Channel SET ScreenSelect NEW Station Select Station Name CharacterTV Station And ID List Station NameTV Station Channel Number Guide ScotlandClock Set Just ClockGuide Program Number Set Video Plus+ SetupNumber OK or%Questions And Answers Playback RecordingTroubleshooting PowerTimer Recording Index Front ViewRear View Remote Control How To Use Operating JVC TVsVCR, TV Prog +/-,TV +/-, TV Muting Display Panel VPS/PDCSpecification S HR-J455/256/255EK/255ES