JVC HR-J255ES, HR-J455EK How To Use, Operating JVC TVs, VCR, TV Prog +/-,TV +/-, TV Muting

45

)WEEKLY Button enables timer recording of weekly serials. ☞ pg. 15, 17

qAUX Button selects recorder's auxiliary input mode. ☞ pg. 24

w ä Button engages timer-standby mode.

☞pg. 15, 17

eDATE +/– Button inputs date of programme for timer recording. ☞ pg. 16

rTV PROG +/– Button — same as button on recorder. ☞ pg. 12

t30 SEC Button initiates a 30-second period of fast-motion playback. ☞ pg. 19

yAuto Tracking Button enables/disables auto tracking mode during playback ☞ pg. 22 SP/LP Button selects tape speed. ☞ pg. 12

uPlay Button — same as button on recorder. ☞ pg. 10, 11

iFast Forward Button — same as button on recorder. ☞ pg. 10, 11

oPause Button — same as button on recorder. ☞ pg. 11

pOK Button enters selections made in on-screen menus. ☞ pg. 20

Q% %Button initiates functions such as Index Search ☞ pg. 19, variable-speed search, frame by frame playback. ☞ pg. 11

TV +/–Buttoncontrols volume of connected TV. ☞ "Operating JVC TVs" in the right column.

How To Use

The remote control can operate most of your video recorder's functions, as well as basic functions of JVC TV sets. (See below.)

●Point the remote control toward the sensor window.

●The maximum operating distance of the remote control is about 8 m.

Operating JVC TVs

To operate your TV, while holding down the TV button, press the corresponding button: STANDBY/ON , TV/

VCR, TV PROG +/–,TV +/–, (TV Muting).

NOTES:

●When inserting the batteries, be sure to insert in the correct directions as indicated under the battery cover.

●Depending on the type of JVC TV, there may be cases where some or all functions cannot be operated using the remote control.

●If the remote control doesn't work properly, remove its batteries, wait a short time, replace the batteries and then try again.