JVC HR-J4003UM manual Access Auto Timer

Page 26

26

MENU

TIMERRECORDING(cont.)

	Auto Timer
	When activated, this function automatically engages the timer
	when the VCR's power is turned off, and disengages it when the
OK	power is turned on.
OK

5/8

– +

6 ª £

q

CH

	ACCESS MAIN MENU
1	SCREEN
1	Press MENU.
	ACCESS FUNCTION SET
2	SCREEN
	Place the arrow next to "FUNCTION SET" by pressing
	CH5°, then press OK.
	ACCESS AUTO TIMER
	SCREEN

1 2

4 5

78

0

OK

3

6

9

TIMER

MENU

CH

Place the arrow next to "AUTO TIMER" by pressing

CH5°, then press OK. Now skip to step 2 of the

3 procedure below.

Or, during on-screen timer programming ...

		ACCESS AUTO TIMER
1		SCREEN
		In step 5 in the On-Screen Timer Programming
		procedure (☞ pg. 23), press MENU.
2		SELECT MODE
		Place the arrow next to	AUTO TIMER
		your choice ("ON" or	AUTO TIMER
		your choice ("ON" or	=ON
		"OFF") by pressing CH5°.	=ON
		"OFF") by pressing CH5°.	OFF
			PRESS (5,°) TO SELECT
			PRESS (MENU) TO END

		RETURN TO NORMAL
3		SCREEN
3		Press MENU as many times as necessary.

NOTE:

For safety, when AUTO TIMER is set to “OFF”, all other VCR functions are disabled while the Timer mode is engaged. To disengage the timer, press TIMER.

Image 26

Contents HR-J4003UM This unit is produced to comply with Standard IEC Publ Do not place the VCRContents Basic Connections Clock SET Date and Time Access Clock SET ScreenClock Setting Make CorrectionsAccess Band Screen Access Main MenuAccess Tuner SET TunerPress Menu as many times as necessary Perform Auto Channel SETReturn to Normal Screen Access Manual Access Tuner SET ScreenAccess AFC Screen Channel SET ScreenFind Program Start Point Simple PlaybackLoad a Cassette Start PlaybackSimple Recording Playback PlaybackFRAME-BY-FRAME During PlaybackRE-ENGAGE Automatic Tracking Engage Manual Tracking ModeAdjust Manual Tracking Manual TrackingSuperimpose Access Function SETAccess Superimpose Start Repeat Access Distant CodeSkip Over Unwanted Sections Stop RepeatMemory Activate Instant ReviewActivate Counter Return to Counter Position ZeroTape Position Indicator Next-Function MemorySystem Access Main Menu ScreenS.T. Picture System Quality of the tape Use, then recording RecordingPress and hold REC Begins with the picture Level optimizedTape in use PlaybackBefore beginning, perform steps 1 and 2 on Recording Engage TV ModeReset Counter to Zero Select Channel for ViewingEngage ITR Mode Instant Timer Recording ITROn-Screen Timer Programming Access Program SET ScreenInformation Select Program NumberSET Program Cancel a Program Disengage TimerAccess Program SET RE-ENGAGE TimerPlace the arrow next to Auto SP/EP Timer by Access Auto SP/EPAuto SP/EP Timer Your choice on orAccess Auto Timer Auto TimerEdit From a Camcorder Load Cassettes SET RECORDER’S Input ModeEdit To Or From Another Control Two JVC VCRsRandom As- semble Editing Prepare for EditingEND R.A. Edit Locate EDIT-OUT PointStart R.A. Edit Turn on the TV SET Remote ControlTV Multi-Brand Remote Control SET TV Brand CodeMake sure the window side is up, Remote control won’t function Batteries are dischargedCassette gets stuck partway Has not been programmed correctly Cassette is automatically Timer againWhen scanning channels, some Questions and Answers MBR Multi-Brand Remote Code Setting List Of TermsRamdom Assemble Editing connector pg PowerRemote Control Provided Front Display PanelMaximum recording time EIA monochrome signal20C to 60C -4F to140F Frequency-synthesized tuner